Does anyone know the exact size of the 2 small screws that fasten to diamond shaped cover for the fuel lever/switch?
Mine are worn and I would like to replace them with alan head screws.
I believe they are m3. I switched over to allen and accidentally over torqued them and actually stripped the aluminum threads. I went back to philips and did not have any issues as long as I used a #1 philips
Just be careful!
he petcock rebuild kit I bought came with 2new allen head screws, look like m3 if I measure them
Thank you! I took your advice and ordered new philips head screws direct from yamaha for a couple of bucks.
No problem!