Print Page - Aluminum head washers

Title: Aluminum head washers
Post by: rd400canuck on January 13, 2020, 09:11:14 PM

Another quick questions...

The bike didnt have any of the aluminum washers under the head bolts like it should have. Is there any problem with me just finding a similar size and thickness in stainless or steal?

Title: Re: Aluminum head washers
Post by: m in sc on January 13, 2020, 11:17:16 PM

stock rd ones are steel, the aluminum washers IMHO are too soft to run. i run steel ones, but on the lightweight i have titanium with aluminum head bolts. ;)

Title: Re: Aluminum head washers
Post by: SoCal250 on January 13, 2020, 11:27:35 PM

FWIW the DG ones are steel too http://www.2strokeworld.net/forum/index.php?topic=55.msg647#msg647

Title: Re: Aluminum head washers
Post by: pdxjim on January 14, 2020, 12:22:30 AM

Watercoolers (LC, RZ, TZR, etc) use copper crush washers at the head bolts that are within the water jacket.

Never seen aluminum ones.

Title: Re: Aluminum head washers
Post by: m in sc on January 14, 2020, 06:39:01 AM

rdlc topend studs & bolts don't go into the water jacket. :twocents:

Title: Re: Aluminum head washers
Post by: pdxjim on January 14, 2020, 10:17:47 AM

Quote from: m in sc on January 14, 2020, 06:39:01 AM
rdlc topend studs & bolts don't go into the water jacket. :twocents:

True. Maybe it's just TZR are like that.

Title: Re: Aluminum head washers
Post by: rd400canuck on January 14, 2020, 08:15:49 PM

ok thanks guys... just wanted to make sure. i went and bought some from canadian tire. steel ones.

Title: Re: Aluminum head washers
Post by: Srhiskx on January 15, 2020, 07:06:36 PM

my RZ has steel washers on the head bolts. I've got Ti head bolts on it.

2 STROKE WORLD .net

The 2-Stroke Garage => General Chatter => Topic started by: rd400canuck on January 13, 2020, 09:11:14 PM