Print Page - RD400 racing oil catch pan

Title: RD400 racing oil catch pan
Post by: triple1972 on February 25, 2020, 02:08:04 AM

After I meet guys at the track I won't have to ask so many questions! I will need an oil catch pan for USCRA Formula RD racing. I know this is not a racing forum and I'm not even a racer until later this spring. Anybody know who makes these pans? Thanks!

Title: Re: RD400 racing oil catch pan
Post by: SUPERTUNE on February 25, 2020, 07:06:56 AM

Call Sakis.
He's in West Palm, Fl. He makes all the race fiberglass bodywork.
Tell him Chuck sent you. His # is: five 1 six, three 1 three, 0 nine zero 7
Chuck

Title: Re: RD400 racing oil catch pan
Post by: Plasticman on February 25, 2020, 11:47:13 AM

+1 on calling Sakis. He makes all my bodywork for my RD400.

Rob

Title: Re: RD400 racing oil catch pan
Post by: triple1972 on February 25, 2020, 09:56:55 PM

he makes the pan that mounts under your engine to catch trans. oil?

Title: Re: RD400 racing oil catch pan
Post by: Plasticman on February 27, 2020, 08:33:08 AM

Yes.

Rob

Title: Re: RD400 racing oil catch pan
Post by: RDFL on February 27, 2020, 06:07:47 PM

Did you ask him about a seat?

Title: Re: RD400 racing oil catch pan
Post by: paul1478 on March 03, 2020, 09:19:24 AM

I emailed him and no reply. I need to follow-up, Maybe a call is the best way. I also want a seat of some kind.

Title: Re: RD400 racing oil catch pan
Post by: Plasticman on March 03, 2020, 04:10:41 PM

He had surgery on his left hand yesterday (posted a picture of it on Instragram). I'm not sure how long he'll be out of commission.

Rob

Title: Re: RD400 racing oil catch pan
Post by: RDFL on March 03, 2020, 04:46:35 PM

I hope not long was going to get in touch with him for another fairing.

2 STROKE WORLD .net

The 2-Stroke Garage => Turning Wrenches => Topic started by: triple1972 on February 25, 2020, 02:08:04 AM