Hi guys,
Just need to know the size of the hose that joins the tank halves
the size that goes to the carbs from the tank
and size for all the venting hoses from the carbs that head to past the swing arm and point at the ground.
Also... a good idea to separate the tank halve tube without it spilling all over the effing place. A good quality quick disconnect maybe?
Thanks again
John
economy cycle sells quick connect for exactly that reason. i think its 6mm? or 1/4"
Prefect!
ya 1/4" is the size for fuel line and vent hose below. Keep the slack out of the crossover line to keep the quick disconnect up and away from the engine, the heat can get to them and they'll leak.
disconnect
https://www.economycycle.com/shop/yamaha-rz-350/other/misc/quick-disconnect-fuel-coupling-dual-shutoff-in-14-or-516/ (https://www.economycycle.com/shop/yamaha-rz-350/other/misc/quick-disconnect-fuel-coupling-dual-shutoff-in-14-or-516/)
Vent line
https://www.economycycle.com/shop/yamaha-rd250350400r5ds6ds7-parts/engine-related/oil-pump/fuelventoil-line-18id-x-5-clear-or-black/ (https://www.economycycle.com/shop/yamaha-rd250350400r5ds6ds7-parts/engine-related/oil-pump/fuelventoil-line-18id-x-5-clear-or-black/)
Hey Economy Cycle... a shout out for you guys. Over the last number of months of me restoring this RD400 you have been really good to me and wonderful to deal with.. so thank you!
John - Ottawa
I wish I had seen that when I placed my last order. I would have replaced the one I have. I need to search better.
and I agree, EC is great help, great customer service, and super fast shipping!!
Quote from: rd400canuck on March 11, 2020, 02:20:53 PM
Hey Economy Cycle... a shout out for you guys. Over the last number of months of me restoring this RD400 you have been really good to me and wonderful to deal with.. so thank you!
:agree:
John & Terry and the team at Economy Cycle are good people! :thumbs: They always go above and beyond for us. We need to support them so they will continue to be around to provide all the bits (and advice) to keep our old bikes going.
Quote from: SoCal250 on March 11, 2020, 03:56:51 PM
Quote from: rd400canuck on March 11, 2020, 02:20:53 PM
Hey Economy Cycle... a shout out for you guys. Over the last number of months of me restoring this RD400 you have been really good to me and wonderful to deal with.. so thank you!
:agree:
John & Terry and the team at Economy Cycle are good people! :thumbs: They always go above and beyond for us. We need to support them so they will continue to be around to provide all the bits (and advice) to keep our old bikes going.
Not that it really needs to be said but I 100% agree with this. Customer service and communication has been top notch by them. At one point John had even offered to send free replacement swingarm bushings for a problem that wasn't theirs. I declined but the offer was appreciated. Keep up the good work Economy.
Quote from: rd400canuck on March 11, 2020, 02:20:53 PM
Hey Economy Cycle... a shout out for you guys. Over the last number of months of me restoring this RD400 you have been really good to me and wonderful to deal with.. so thank you!
John - Ottawa
Thanks very much John! I'll let Terry know as well.
Quote from: paul1478 on March 11, 2020, 02:22:53 PM
I wish I had seen that when I placed my last order. I would have replaced the one I have. I need to search better.
and I agree, EC is great help, great customer service, and super fast shipping!!
Thanks so much Paul, much appreciated.
John
Quote from: oxford on March 11, 2020, 04:29:03 PM
Quote from: SoCal250 on March 11, 2020, 03:56:51 PM
Quote from: rd400canuck on March 11, 2020, 02:20:53 PM
Hey Economy Cycle... a shout out for you guys. Over the last number of months of me restoring this RD400 you have been really good to me and wonderful to deal with.. so thank you!
:agree:
John & Terry and the team at Economy Cycle are good people! :thumbs: They always go above and beyond for us. We need to support them so they will continue to be around to provide all the bits (and advice) to keep our old bikes going.
Not that it really needs to be said but I 100% agree with this. Customer service and communication has been top notch by them. At one point John had even offered to send free replacement swingarm bushings for a problem that wasn't theirs. I declined but the offer was appreciated. Keep up the good work Economy.
Thanks very much Russ!
And, Economy is only a short drive for me, I'm always welcomed and get incredible advice and customer service.