I am willing to help/teach/instruct for 3 days in June or July if someone is interested in coming to my shop to port their DS7 or R5 cylinders to Stage 1, hot street, and deck the heads for 92/93 octane. Only a few requirements which are you must commit to the 3 full days (8 to 5), must be able to stand for long periods and the cylinders and heads must be media blasted before your arrival. The cleanliness is mandatory or you just wasted a trip and deprived someone else of being here. I have all the porting tools and machinery required. I'm retired and have been doing this to give back a bit to the 2 stroke community. You will need to find a motel or campground for your lodging and be prepared to go for fast food lunches, I am not going to charge for the 3 days (use that savings to clean the parts). Bring your top end only, do not bring the bike, we are not building a running bike, only doing the porting and heads. I suggest you plan on having a fresh bore job after you get home, we will not be boring the cylinders here. Eye protection is mandatory and no alcohol or drugs during shop time. Yes, I've had both happen with different people that's why I mentioned it.
If you have another bike, 2 stroke or 4 stroke, and want to enjoy some of the back roads here then bring it along and we can take an evening ride. Lots of turns to play with in this area.
Message me through the board if interested. I should be able to answer most questions.
Wow that's quite a generous offer John! :clap: A great opportunity for someone!
That is so cool!
If i just had the time. dammit.
:patriot:
[quote author=John Ritter link=topic=1988.msg16778#msg16778 date=1 no alcohol or drugs during shop time. Yes, I've had both happen with different people that's why I mentioned it.
.
[/quote] Used to work with guy who could not go 2 hours without a bowl. Is a very generous offer.
This gives me the opportunity to thank John again for the work he did on my 400 motor almost 10 years ago. :eek: Porting, bore, head, reeds. It runs incredible. Since then I have done rings once and then new pistons 2 years ago. Same bore. I have done just about everything with my bike. Back road riding, hooligan, track days, missed shifts to 14K rpm (??). It has great street torque and crazy power at 10K. It is bullet proof. Even after 10 years, EVERY time I ride it, and I get to a area where the throttle gets turned it's a wow moment. Thanks, John.
(https://i.ibb.co/jwy1gG4/SANY0188.jpg) (https://ibb.co/dpPzG6K)
That's very generous of you John! Someone is going to score a wealth of knowledge! Where is your shop located?
Located in Lawrenceburg, TN 38464
John pm sent.
Guys, unfortunately I did not have anyone who is a straight up non-ported DS7 or R5 rider contact me this round. Was worth a shot and maybe I will be able to offer again at a later date. Thanks to the guys that did contact me but I wanted to stay within the parameters I originally expressed. John Ritter
Thanks John! I meet all your parameters except for time this go round. It is a very generous offer that hopefully comes up again in the future.