Print Page - What’s the purpose of this arrow?

Title: What’s the purpose of this arrow?
Post by: patastinky on July 21, 2020, 09:51:20 PM

:umm:
(https://i.imgur.com/oHvCS9I.jpg)

Title: Re: What’s the purpose of this arrow?
Post by: 85RZwade on July 22, 2020, 12:59:07 AM

Supertune to the rescue

http://www.2strokeworld.net/forum/index.php?topic=1304.0 (http://www.2strokeworld.net/forum/index.php?topic=1304.0)

Title: Re: What’s the purpose of this arrow?
Post by: patastinky on July 22, 2020, 06:51:02 AM

Quote from: 85RZwade on July 22, 2020, 12:59:07 AM
Supertune to the rescue
Thank you.

http://www.2strokeworld.net/forum/index.php?topic=1304.0 (http://www.2strokeworld.net/forum/index.php?topic=1304.0)

QuoteSpecial Note:The late model 7 plate clutch inner and outer pressure plate are clocked units and must have the arrows or slash marking lined up when installing.
You have 6 bolt bosses, only 3 of the 6 ways it goes on is correct and 3 are wrong. If installed wrong the clutch will not fully seat against the fiber plates and you'll have no clutch engagement!!
-Chuck

:metal:

2 STROKE WORLD .net

The 2-Stroke Garage => Turning Wrenches => Topic started by: patastinky on July 21, 2020, 09:51:20 PM