Print Page - Brown, brown/white and black wires question

Title: Brown, brown/white and black wires question
Post by: patastinky on October 08, 2020, 02:50:18 PM

Hello

Trying to figure out where do these hook up ? Any idea? These are under the gas tank.

(https://imgur.com/a/d4hT2KZ)
https://imgur.com/a/d4hT2KZ

Title: Re: Brown, brown/white and black wires question
Post by: rodneya on October 08, 2020, 02:57:52 PM

Brown and brown/white are flasher relay
Black should just go to ground

Title: Re: Brown, brown/white and black wires question
Post by: patastinky on October 08, 2020, 04:48:02 PM

Quote from: rodneya on October 08, 2020, 02:57:52 PM
Brown and brown/white are flasher relay
Black should just go to ground

Should I then hook up the brown and brown white together? I'll ground the black. Thanks.

Title: Re: Brown, brown/white and black wires question
Post by: SoCal250 on October 08, 2020, 04:48:27 PM

Yamaha Wiring Diagrams (http://www.2strokeworld.net/forum/index.php?topic=35.msg92#msg92)

Title: Re: Brown, brown/white and black wires question
Post by: 1976RD400C on October 08, 2020, 05:17:15 PM

Do you turn signals and a flasher? If so, then like what rodneya says, the brown/white and brown go to the 2 wires of the flasher.

Title: Re: Brown, brown/white and black wires question
Post by: m in sc on October 08, 2020, 05:24:58 PM

bn/w is the feed from the flasher to the turn signal switch. brown is switched power. black is ground.

Title: Re: Brown, brown/white and black wires question
Post by: patastinky on October 08, 2020, 07:00:57 PM

Thanks guys. Will do that. Getting close to starting her up.

2 STROKE WORLD .net

The 2-Stroke Garage => Turning Wrenches => Topic started by: patastinky on October 08, 2020, 02:50:18 PM