Print Page - Will these shocks work on a RD350 with stock pipes?

Title: Will these shocks work on a RD350 with stock pipes?
Post by: Twidget on February 05, 2022, 12:16:12 PM

I am looking for decent shocks that will work on an rd350 with stock pipes. So far this is the best I could come up with, but I'm afraid they might be a little long for stock pipes:

https://www.ebay.com/itm/360913720923

Is 320mm/12.5" about the length limit for bikes with stock pipes?

Any other suggestions for good options out there that perform better than stock, but aren't $300ea custom shocks?

Title: Re: Will these shocks work on a RD350 with stock pipes?
Post by: Twidget on February 05, 2022, 12:18:14 PM

Or these?

https://www.ebay.com/itm/360633097672

It seems like what I might need are the red wing KM-S320's, but of course those are nowhere to be found.

Title: Re: Will these shocks work on a RD350 with stock pipes?
Post by: m in sc on February 05, 2022, 01:38:20 PM

yes, but will foul chainguard if you are running one. bit taller than stock but ive run them before.

Title: Re: Will these shocks work on a RD350 with stock pipes?
Post by: Twidget on February 05, 2022, 02:36:51 PM

Any significant difference between the Red Wing's and the Assault's?

Equally crappy? :haw:

Title: Re: Will these shocks work on a RD350 with stock pipes?
Post by: m in sc on February 05, 2022, 09:41:10 PM

basically same thing. better than they should be for the money. i was always happy with them, ran them on the S2. :gentleman:

2 STROKE WORLD .net

The 2-Stroke Garage => Turning Wrenches => Topic started by: Twidget on February 05, 2022, 12:16:12 PM