I got a bike this past weekend
RD350 B
Had the stock footpegs removed, and rearsets which I no longer need
Came with stock footpegs, which I am putting back on.
Does the motor need to be lifted in order to get those special bolts back in from the top?
I hope not.
Bike did not come with them, so ordered some off of Ebay
yes it does.
so remove front 2 bolts & top rear.
Loosen bottom rear, and will it pivot / swing up far enough to get these in?
M
thats probably enough. doesnt need much
I used a bottle jack and did the method as described.
I maybe interested in the rear set, if you don't need them.