Text only | Text with Images

2 STROKE WORLD .net

The 2-Stroke Garage => General Chatter => Topic started by: m in sc on December 21, 2022, 11:03:13 AM

Title: JIS fasteners at McMaster
Post by: m in sc on December 21, 2022, 11:03:13 AM
Just as an FYI, they do carry JIS hardware, in particular, the 12mm hex m8 nuts and panhead screws.

Im not sure how recent this is, but I don't remember them having them a few yrs ago. the nuts in particular are necessary on some exhaust and cylinder applications.

https://www.mcmaster.com/jis/

Title: Re: JIS fasteners at McMaster
Post by: SoCal250 on December 22, 2022, 11:58:13 AM
and in stainless too :thumbs:
Title: Re: JIS fasteners at McMaster
Post by: m in sc on December 22, 2022, 01:20:51 PM
the flanged jis ones just came in this morning, they look great. for the cyls and head on the tzr... and yes, 12mm for sure.
Title: Re: JIS fasteners at McMaster
Post by: gardenhosebusabottle on December 24, 2022, 02:16:11 PM
Very nice.  Bookmarked!

I have similar 10.9 JH flanged for the intake manifolds (local hardware store).  Didn't know they had the exhaust Flange nuts. <--What size are the exhaust nuts for the 400?
Title: Re: JIS fasteners at McMaster
Post by: Vintagetz on December 24, 2022, 02:53:43 PM
8X1.25
Title: Re: JIS fasteners at McMaster
Post by: 350GUY on January 01, 2023, 04:29:38 PM
They also carry JIS bit sets...

https://www.mcmaster.com/jis/jis-bit-sets/
Text only | Text with Images