Text only | Text with Images

2 STROKE WORLD .net

The 2-Stroke Garage => Turning Wrenches => Topic started by: Rdrocket on March 04, 2023, 06:27:10 PM

Title: Outer crank bearings
Post by: Rdrocket on March 04, 2023, 06:27:10 PM
So I'm changing the outer bearings on the rd350. Old bearings had only a half circlip but the new ones have a full circlip. Which is proper?
Thanks
Title: Re: Outer crank bearings
Post by: Striker1423 on March 04, 2023, 06:35:37 PM
Half circlip. Take the full one off and use the stock one. The top half of the cases don't have a groove for one.
Title: Re: Outer crank bearings
Post by: Rdrocket on March 04, 2023, 07:13:36 PM
Rad thank you
Text only | Text with Images