2 STROKE WORLD .net

The 2-Stroke Garage => Turning Wrenches => Topic started by: Fastash on June 14, 2019, 06:54:11 PM

Title: Got bike started after total rebuild but...........
Post by: Fastash on June 14, 2019, 06:54:11 PM
It his only firing intermittently on the left side. New points fresh fuel new plugs new battery just pulled carbs to double check all looks good. Any suggestions?
Title: Re: Got bike started after total rebuild but...........
Post by: quocle603 on June 14, 2019, 09:41:48 PM
i assume you double checked your timing?
Title: Re: Got bike started after total rebuild but...........
Post by: Frank B on June 14, 2019, 10:06:36 PM
If there isn't steady spark then check the coils. Double check the points gap, check wiring.
Title: Re: Got bike started after total rebuild but...........
Post by: Fastash on June 15, 2019, 09:05:17 AM
Going to double check timing tomorrow . Seems like the culprit !
Title: Re: Got bike started after total rebuild but...........
Post by: SUPERTUNE on June 15, 2019, 11:35:56 PM
I see a lot of stator harness to main harness plugs have bad connections.
Chuck
Title: Re: Got bike started after total rebuild but...........
Post by: quocle603 on June 16, 2019, 10:12:50 AM
Report back and let us know how you make out. Use Mark's video as a guide to set your timing.