2 STROKE WORLD .net

The 2-Stroke Garage => Turning Wrenches => Topic started by: rd400greenhorn on June 21, 2019, 04:53:58 PM

Title: A Quick Throttle and cables for a set of 34mm TM carbs
Post by: rd400greenhorn on June 21, 2019, 04:53:58 PM
Any setup / recommandation on what works?
Preferrable the Throttle in Black

Chuck supertune, maybe you have a working set? :)
Title: Re: A Quick Throttle and cables for a set of 34mm TM carbs
Post by: SUPERTUNE on June 21, 2019, 05:51:52 PM
I build to order...whatever you want.
Premix or oil pump?

Magura Duo 314 for both...

(https://photos.imageevent.com/supertune/paulsrd400/large/20180819_170830.jpg)

Oil pump setup...

https://imageevent.com/supertune/guillermosrd400videos?p=0&n=1&m=-1&c=3&l=0&w=4&s=0&z=3 (https://imageevent.com/supertune/guillermosrd400videos?p=0&n=1&m=-1&c=3&l=0&w=4&s=0&z=3)

https://imageevent.com/supertune/guillermosrd400videos?p=1&n=1&m=-1&c=3&l=0&w=4&s=0&z=3 (https://imageevent.com/supertune/guillermosrd400videos?p=1&n=1&m=-1&c=3&l=0&w=4&s=0&z=3)


Domino made in italy for premix only with a dual pull TZ type.

(https://www.denniskirk.com/dk/product_images/oe/290pix/oep1913239_745b96d08ddf823b4d5f72d5408015dcf7c4bd7f.jpg)



Chuck
Title: Re: A Quick Throttle and cables for a set of 34mm TM carbs
Post by: rd400greenhorn on June 21, 2019, 05:55:54 PM
Chuck
That looks very Nice, the magura is sweet.

Its premix :)
I would love a set for my build, then i know it works and looks just right  :patriot:
Title: Re: A Quick Throttle and cables for a set of 34mm TM carbs
Post by: rd400greenhorn on June 21, 2019, 05:58:49 PM
Or either one actually
Any preference? :)

Just as clean and tight as Possible
Title: Re: A Quick Throttle and cables for a set of 34mm TM carbs
Post by: quocle603 on June 21, 2019, 10:37:37 PM
BRAPPPPP!
Title: Re: A Quick Throttle and cables for a set of 34mm TM carbs
Post by: SUPERTUNE on June 21, 2019, 10:52:50 PM
The dual pull Domino one is better!  Here's why... No splitter to deal with...
Also when wanting to rejet carbs, much easier to pull each carb out because of the 2 single cables give you more slack to pull out more to get to the top screws on TM flatslides and don't seem to be as fussy with re-synching the cables all the time.

A single pull Magura throttle has to use a splitter,  the splitter has to be very close to the stock location so limits how far you can pull out the carbs with the cables attached to the carbs and it you pull a little too much, you get the carbs cables out of sync again! :bang:
Plus I have to use a inline cable adjuster on the single side to control slack as no adjusters at the throttle cable hookup with the Magura.

Just some info for all of you!!
Chuck
Title: Re: A Quick Throttle and cables for a set of 34mm TM carbs
Post by: SUPERTUNE on June 21, 2019, 10:55:26 PM
Quote from: quocle603 on June 21, 2019, 10:37:37 PM
BRAPPPPP!

Oh, you watched the Video didn't you?  :metal:
C
Title: Re: A Quick Throttle and cables for a set of 34mm TM carbs
Post by: rd400greenhorn on June 22, 2019, 02:25:42 AM
Chuck,  would you send a message or mail, s domino Throttle with the cables, i would like to buy a set from you :)
Thanks again
Title: Re: A Quick Throttle and cables for a set of 34mm TM carbs
Post by: m in sc on June 22, 2019, 10:08:05 PM
Chuck sold me one of the dual pulls for the LC hybrid. its great. totally worth it.  :toot:

(http://www.2strokeworld.net/wp-content/uploads/LC-HYBRID/largemouth34s-2018/lc-new34s_12.jpg)
Title: Re: A Quick Throttle and cables for a set of 34mm TM carbs
Post by: rd400greenhorn on June 23, 2019, 02:12:46 AM
Thats awsome!.
I Will go for the same setup, Iam convinced 😁
Title: Re: A Quick Throttle and cables for a set of 34mm TM carbs
Post by: Gill on June 23, 2019, 03:01:18 AM
Chuck, How much does it cost? Twin throttle cable setup!
Title: Re: A Quick Throttle and cables for a set of 34mm TM carbs
Post by: SUPERTUNE on June 23, 2019, 08:25:02 AM
I will send PM's and or emails.

Chuck