Hey guys, I bought a yds3 top end and carbs/stuff from a fellow. He was honwith everything and no issues.
Bores are good but one of the cylinders has a chunk broken off on the lower fin.
I'm thinking I'll take grinder to it and smooth the sharp edges off and run it.
Think it will be OK?
(https://i.postimg.cc/Xr2zVYCb/Messenger-creation-43-C703-EB-58-E4-4372-9-D41-1-A52294-F525-A.jpg) (https://postimg.cc/Xr2zVYCb)
(https://i.postimg.cc/f3JgkQc0/Messenger-creation-5881385-B-14-FE-4-A33-BF8-F-BBB267-E52469.jpg) (https://postimg.cc/f3JgkQc0)
(https://i.postimg.cc/fShHH36x/Messenger-creation-FE6-D2-FD9-9033-46-D3-9921-A94398-A72-F6-C.jpg) (https://postimg.cc/fShHH36x)
it won't affect performance in any real way imho