Print Page - Installing power dynamo ignition on a rd400

Title: Installing power dynamo ignition on a rd400
Post by: rd400greenhorn on August 11, 2019, 06:16:43 AM

Hi guys
Having never worked with ignition before, do you have Any tips, step by step on how i do this

I have installed the plates in the engine, having set approx 0,5mm distance from ignition to the ( see picture)

The dial gauge, do I set it at 0, as now or?
. What do I do from here..

Guidance 😁

:umm:

Title: Re: Installing power dynamo ignition on a rd400
Post by: rd400greenhorn on August 11, 2019, 06:39:31 AM

...

Title: Re: Installing power dynamo ignition on a rd400
Post by: SUPERTUNE on August 11, 2019, 08:27:23 AM

I'm uploading pictures and videos today on the way I install them.
Chuck

Title: Re: Installing power dynamo ignition on a rd400
Post by: rd400greenhorn on August 11, 2019, 08:49:05 AM

Awsome Thank you chuck

Title: Re: Installing power dynamo ignition on a rd400
Post by: SUPERTUNE on August 11, 2019, 09:11:01 AM

I started posting this install info here:

http://www.2strokeworld.net/forum/index.php?topic=855.0

Chuck

Title: Re: Installing power dynamo ignition on a rd400
Post by: rd400greenhorn on August 11, 2019, 09:35:11 AM

Awsome, i Will go check out as you get it All posted.
Perfect timing 🖐️😁

Title: Re: Installing power dynamo ignition on a rd400
Post by: old-too-smoker on August 14, 2019, 07:30:25 AM

PD made a good video on you tube, I used it to set mine on a RD400C

2 STROKE WORLD .net

The 2-Stroke Garage => Turning Wrenches => Topic started by: rd400greenhorn on August 11, 2019, 06:16:43 AM