Quote from: quocle603 on January 10, 2026, 12:14:23 AMTomos a3 a35 a55?????
A35..."Sprint"
https://www.2strokeworld.net/forum/index.php?topic=7189.0
- Welcome to 2 STROKE WORLD .net.
2 STROKE WORLD
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
#1
General Chatter / Re: Treatland sale
January 10, 2026, 03:29:07 PMA35..."Sprint"
https://www.2strokeworld.net/forum/index.php?topic=7189.0
#2
General Chatter / Re: Treatland sale
January 09, 2026, 05:04:35 PM
Thanks, motivated me to get working on my "new" Tomos. I ordered a bunch of stuff today.
#3
General Chatter / Re: Great website?
January 04, 2026, 09:45:06 AM
Registered in August 2025. No information about the registration....
Registrant Contact
Name
Registration Private
Organization
﹣
Phone
﹣
Fax
﹣
Email
REDACTED@REDACTED
Mailing Address
Registration Private, Registration Private, Registration Private
Registrant Contact
Name
Registration Private
Organization
﹣
Phone
﹣
Fax
﹣
REDACTED@REDACTED
Mailing Address
Registration Private, Registration Private, Registration Private
#4
Turning Wrenches / Re: R5 -RD350 conversion
December 21, 2025, 01:18:21 PM
Wow.
- So HVC was repopping, I don't see them on their site any more.
- HVC shows a set of Wiesco+1.0 in stock but they MAY need a different bore clearance than yours.
- Yambits OEM and Wossner are out of stock.
- Economy doesn't show any but you should at least call John and ask.
- One Ebay seller appears to have a complete Wossners +1 set. Search out seller bikebuzzard2.
Many of us went through an R5 piston drought in the 00's, then some reproduction (Wossner, HVC...) and OEMs starting showing up from peoples stashes. Seems like we are back in a drought. My +.75 HVC top end has about 3000 miles on it. Fingers crossed.
Good luck. Keep searching. They exist.
Keep in mind that some markets including th UK called them YR5's...
- So HVC was repopping, I don't see them on their site any more.
- HVC shows a set of Wiesco+1.0 in stock but they MAY need a different bore clearance than yours.
- Yambits OEM and Wossner are out of stock.
- Economy doesn't show any but you should at least call John and ask.
- One Ebay seller appears to have a complete Wossners +1 set. Search out seller bikebuzzard2.
Many of us went through an R5 piston drought in the 00's, then some reproduction (Wossner, HVC...) and OEMs starting showing up from peoples stashes. Seems like we are back in a drought. My +.75 HVC top end has about 3000 miles on it. Fingers crossed.
Good luck. Keep searching. They exist.
Keep in mind that some markets including th UK called them YR5's...
#5
General Chatter / Re: A farewell
December 15, 2025, 11:03:03 AM
Tell us Dennis's ashes are in that tank...
My wife has been instructed to run a pinch of ashes through my motorcycles.
My wife has been instructed to run a pinch of ashes through my motorcycles.
#6
General Chatter / Re: Spitfire exhaust Indonesia
December 15, 2025, 11:00:03 AM
Did you fab those hangers? They look much more robust than the ones on his EBay advert.
#7
eBay/FB Marketplace/Craigslist watch / Re: 1984 Skoot Cub, NR - BaT - Anaheim, CA
December 10, 2025, 05:44:34 PM
At the current bid I'd be on that Russ.
#8
General Chatter / Re: Spitfire exhaust Indonesia
December 10, 2025, 05:39:52 PM
If you dig into feedback there are definitely some fitment issues...
#9
Race Discussions / Re: 2026 Supercross, Motocross, SMX Schedule
October 31, 2025, 04:19:13 PM
Fun fact. A friend from high school owns Dirt Werx, the company that builds all the supercross tracks.
#10
General Chatter / Re: DG anodizing
October 31, 2025, 03:55:10 PM
FYI I found some "before" pics...
#11
General Chatter / Re: DG anodizing
October 30, 2025, 09:24:56 PM
I personally used Colors Inc in Indiana as mentioned above, perhaps 15 years ago. Had the heads and swinger done together so they match, beautifully.... All done via US Mail. FYI I used the gold color straight from their palette, not worrying about original since at this point in life who knows what "original" even was. They still dazzle.
#12
Haus of Projects / Re: Yamaha YA-1 Resurrection
October 15, 2025, 07:49:31 PM
Damn Warren. Fantastic.
#13
Turning Wrenches / Re: swingarm questions
August 19, 2025, 09:31:09 PM
Some shots
Fender extenders by Joe Spooner
Fender extenders by Joe Spooner
#14
Turning Wrenches / Re: swingarm questions
August 18, 2025, 09:07:21 PM
I've done the opposite, my 350 has a 400 DG swinger. That totals 2" over...
When I made the required bushings, I made several should anyone need one.
When I made the required bushings, I made several should anyone need one.
#15
General Chatter / Re: DG Head work needed
August 06, 2025, 08:53:15 AM
Scott Clough Racing SCR did mine. Get his ORing option...
(760) 365-4505
(760) 365-4505