Messages

Not bad. Priced little high ( ), but not bad. The header/ muffler coupler doesn't look right. 

Got the kit installed today. There wasn't much wiggle in the stock setup in my opinion. Found out my opinion was distorted. There is NO wiggle with this new bushing. Very nice! Now, I'm focused on how loose the shift lever is at the splines.

I noticed the same thing. My shifter felt good before the install. People even commented on how well the bike shifts. After the install it's so much tighter. No slop at all.

No RG 500? Bogus list.

Right!!

I'm a little surprised the RD500 made the list and the AC 350 did not. They may have felt the LC was enough.

Talk amongst yourselves

Visordown: Top 10 best two-stroke motor... | classic and modern era.
https://www.visordown.com/features/top-10s/master-stroke-what-are-top-10-best-two-stroke-motorcycles-worth-today

What's the final drive gearing?

That is suprising, really, how many are they gonna sell even if every 400 bought one?

Pretty sure these would fit every street oriented yamaha 2 stroke twin starting with the YDS and R5, right?

I installed this on my 400 this year and wow, it really tightens up the shifter and did stop an oil seepage point.

https://www.ebay.com/itm/255039271047?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=p3SyM0ojR-S&sssrc=2349624&ssuid=v1_ClWAsQay&var=&widget_ver=artemis&media=SMS

Great pictures!

Anyone do the DGR this year? Share some pics if you did!

Here are some pics from the ride I went to.

Awesome, Mike!

You took the plunge. Can't wait to see where this goes. 

Used RD400 Mikunis. Only $760! Free shipping too!

https://www.ebay.com/itm/1976-Yamaha-RD400-Set-of-Original-Mikuni-Carburetors-Carbs-Carby-1A1-14101-00-00-/124615737692?_trksid=p2349624.m46890.l49286

I've chased a leak like this on a fresh build. I replaced my clutch pushrod seal and it seemed to lessen or maybe even get rid of the leak. It was late in the season when I changed it and I'll have to confirm once I start riding again for the year.

But yes the pushrod seal, neutral switch, and counter shaft seal are all likely culprits.

Here's a link to the Waterbuffalo patrol bike auction. 5 days left. 

https://iconicmotorbikeauctions.com/auction/1976-suzuki-gt750-patroller/

If you want a very nice setup get springs and gold valve emulators along with new seals.

Preload adjusters can come from Economy Cycle.