News:

Mat Oxley 1986 IOM TT


click above to read more about Mat.

Main Menu

Whats in my garage

Started by busa1300, March 24, 2019, 06:11:25 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

busa1300

#75
Thanks guys  :thumbs:
The addiction continues.....
I have a set of cylinders off to Tuning Works in the UK for a 300 big bore
A set of Veronesi intakes from Italy on their way, so I can mount some Lectron 38's onto my RGV VJ21SP that I had abandoned for 5 months.
I have a NOS crank in the box sitting on the bench and all my dry clutch rebuild parts ready to go in....
Might have it running by first snow.... :eek:

Also have a dyno appointment for the 17th to see what my A/F ratio is on my RZV, and also the TZR/SP

Nothing worthy of pics yet.
RZ350-RZV500R-TZR250RSP 3XV2
RGV250 VJ21 SP/VJ22 SP/VJ23 SP
RS250 for track - KD80 - JR50 for kids
https://youtube.com/@wedgehorsepower9869?feature=shared

busa1300

Short dyno run at Valley Racing with the RZV500R
https://www.facebook.com/157353800971854/videos/311673996793205/

Bike was running lean from bottom all the way to the top according to the A/F ratio
But now I know what to do to get it better and start making some good HP runs
RZ350-RZV500R-TZR250RSP 3XV2
RGV250 VJ21 SP/VJ22 SP/VJ23 SP
RS250 for track - KD80 - JR50 for kids
https://youtube.com/@wedgehorsepower9869?feature=shared

SoCal250

75 Yamaha RD125B   75 Yamaha RD125B (project)
75 Yamaha RD250B   75 Yamaha RD200B (project)
73 Yamaha RD350     77 Yamaha RD400D   79 Yamaha RD400F  
91 Yamaha TZR250R  89 Yamaha FZR400   05 Yamaha FZ6   
05 Yamaha XT225TC  82 Honda MB5  02 Aprilia RS250 Cup (sold)

busa1300

#78
Thanks  :thumbs:
It sounds considerably more intense in real life closed up in the dyno room, than the vid portrays....but my phone is junk for videos  :bang:

A couple more pics of the dyno day.
The TZR/SP had a very good A/F reading throughout. But the factory restrictions really killed the powerband after 9000RPM
After the RZV is dialed in to my satisfaction, I will hook up the SUGO kit ignition, and get the powerjets operational on the 36 Mikunis....with my SPR air inlets for full power.






RZ350-RZV500R-TZR250RSP 3XV2
RGV250 VJ21 SP/VJ22 SP/VJ23 SP
RS250 for track - KD80 - JR50 for kids
https://youtube.com/@wedgehorsepower9869?feature=shared

busa1300

Finishing up paint work, and collecting bits to get the engine back together for the VJ21/SP....but not much to show for all the time that has passed.




Test fitting Lectrons for cables




Veronesi intakes to adapt the 38mm Lectrons in a upright position

RZ350-RZV500R-TZR250RSP 3XV2
RGV250 VJ21 SP/VJ22 SP/VJ23 SP
RS250 for track - KD80 - JR50 for kids
https://youtube.com/@wedgehorsepower9869?feature=shared

busa1300

The 300 big bore parts are here for the VJ21/SP
Almost time to get it all in one piece

RZ350-RZV500R-TZR250RSP 3XV2
RGV250 VJ21 SP/VJ22 SP/VJ23 SP
RS250 for track - KD80 - JR50 for kids
https://youtube.com/@wedgehorsepower9869?feature=shared

85RZwade

I post waayyy too much

rodneya

Quote from: busa1300 on November 14, 2020, 08:24:53 PM
The 300 big bore parts are here for the VJ21/SP
Almost time to get it all in one piece



Looks like Christmas came early

busa1300

#83
Yes it came early  :thumbs:
Too bad I had to use my money for my own presents....but at least I got what I wanted....

Going through all the parts I have bought, trying to see what I have forgot for the RGV/SP
All new dry clutch plates, and the various oil seals that are needed, powervalve cables, throttle cables, clutch cable, oil lines...and my new crank are already here.
I have a new list started, but I'll get serious this weekend and try to make one last order.





RZ350-RZV500R-TZR250RSP 3XV2
RGV250 VJ21 SP/VJ22 SP/VJ23 SP
RS250 for track - KD80 - JR50 for kids
https://youtube.com/@wedgehorsepower9869?feature=shared

busa1300

I can almost see the smoke rolling out.... ;D













RZ350-RZV500R-TZR250RSP 3XV2
RGV250 VJ21 SP/VJ22 SP/VJ23 SP
RS250 for track - KD80 - JR50 for kids
https://youtube.com/@wedgehorsepower9869?feature=shared

dgorms

Bike porn at it's purist.........................................D
rz,r5,ds7,srx,fzr400rr,vfr,cl77,s90, F-7,CL 77, CA-77,ad infinitum

busa1300

#86
Thanks   :thumbs:
Trying to get as close to a GP bike as I can for the street


Yamaha strokers in hibernation mode.....



RZ350-RZV500R-TZR250RSP 3XV2
RGV250 VJ21 SP/VJ22 SP/VJ23 SP
RS250 for track - KD80 - JR50 for kids
https://youtube.com/@wedgehorsepower9869?feature=shared

busa1300

Still inching away on the RGV
Waiting on a set of shorter intakes for my carbs, and a set of shorty kit baffles from Japan yet.
Wiring done for the Zeel and my Dyna coils.
Powervalves set, TPS set, and ignition curves programmed in.
Kicked over and have spark.

Almost there.






RZ350-RZV500R-TZR250RSP 3XV2
RGV250 VJ21 SP/VJ22 SP/VJ23 SP
RS250 for track - KD80 - JR50 for kids
https://youtube.com/@wedgehorsepower9869?feature=shared

busa1300

It's first few minutes of it's new life



RZ350-RZV500R-TZR250RSP 3XV2
RGV250 VJ21 SP/VJ22 SP/VJ23 SP
RS250 for track - KD80 - JR50 for kids
https://youtube.com/@wedgehorsepower9869?feature=shared

rodneya

Sweet. Those lectrons look pretty good in there