News:

Mat Oxley 1986 IOM TT


click above to read more about Mat.

Main Menu

Jetting Baseline VM32's

Started by Economy Cycle John, May 02, 2019, 01:42:48 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Economy Cycle John

Anyone have a good baseline jetting for VM32's on a 350?
www.EconomyCycle.com - RD/RZ Parts, Services, Tools, Accessories & Swag

SUPERTUNE

Been a long time I did VM32's.

Ported cylinders, UPP manifolds w/ crossover, DG pipes, 1.9mm timing, cut cylinders for 400 headgaskets, uni filters, tdr reeds.
3.0 slides, 6DH3-2,  159-P6, 42.5 pilot 310 mains, 2.0 airjet.

Chuck
RD machine work, boring, porting, cranks and engine building.


Chuck 'SUPERTUNE' Quenzler III
Team Scream Racing LLC
1920 Sherwood St. STE A
Clearwater, FL. 33765
cqsupertune@tampabay.rr.com

Economy Cycle John

www.EconomyCycle.com - RD/RZ Parts, Services, Tools, Accessories & Swag

Tuck

I know your asking for a 350, but just thought I would throw this out there... I was using vm32 before I got the TM34's (Thank you Chuck). Jetting I ended up with was,  320 main, 45 pilot, 159-P2, 6DH3, 2.5 slide.  :twocents:

Economy Cycle John

Quote from: Tuck on May 02, 2019, 03:51:25 PM
I know your asking for a 350, but just thought I would throw this out there... I was using vm32 before I got the TM34's (Thank you Chuck). Jetting I ended up with was,  320 main, 45 pilot, 159-P2, 6DH3, 2.5 slide.  :twocents:

Thanks Tuck, very helpful
John
www.EconomyCycle.com - RD/RZ Parts, Services, Tools, Accessories & Swag