Various Machining Services

sav0r (CL MotoTech) · September 15, 2024, 01:14:09 PM

Hey guys, I have slowly built up a decent set of machine tools in my home shop and with winter coming and the race car season soon to slow, I will be back in my shop more often.

Right now I am doing GT750 water pump gears and squish band cylinder heads, but I am expanding into air cooled cylinder bore and hones. I have all the tooling, but depending on the cylinder I may need to make a flex plate.

I can also do a range of custom machining. Brake spacers, custom cylinder had shapes, rear set brackets, etc.. Just inquire with me and will see if I can do it.

GT750
Center plugs and machine head with squish - $450
O-ring head or Cylinder - 300$
Billet High flow Water Pump Impeller and Cover - $400
Billet Aluminum Water Pump Gear - $135

Cylinder bore and hones (and chamfer)
$100 per cylinder

This isn't my full time job, but I try to get jobs turned around as quickly as possible. Lately things have been moving pretty quickly. Feel free to post here with questions.

sav0r (CL MotoTech) · January 22, 2025, 09:52:12 AM

Hey guys, I have gotten a lot of interest from around here. As spring time approaches I'd like to keep that going.

Just send me a PM to get an order placed. Any 2t world member will get a 15% discount.

85RZwade · January 22, 2025, 03:30:15 PM

Hawaii-Mike · January 24, 2025, 09:36:08 PM

Nice!

Kawtriplefreak · January 25, 2025, 10:47:01 AM

sav0r (CL MotoTech) · February 03, 2025, 09:01:12 AM

I have a customer that was interested in the GT750 high flow water pump kit we built for our race car. Now I didn't want to do the full size stuff that we run on the car for his motorcycle, but I made him up the large BDK style kit we initially made. I revised the pump cover some since it never looked all that great for the racecar (function over form on that project). I spent a fair amount of time on it, figured I could take some decent photos of a few of the parts.

sav0r (CL MotoTech) · May 06, 2025, 09:17:12 AM

I am taking a short break from some of these services while I settle my mother's estate. There is just a little too much going to be able to focus on extra work while working through probate. If I have talked to you about doing work, the offer is on the table. If we haven't talked, feel free to reach out if you are interested in future work, but my responses may not be as quick as I'd like.

grcamna3 · May 06, 2025, 10:38:35 AM

Quote from: sav0r on May 06, 2025, 09:17:12 AMI am taking a short break from some of these services while I settle my mother's estate. There is just a little too much going to be able to focus on extra work while working through probate. If I have talked to you about doing work, the offer is on the table. If we haven't talked, feel free to reach out if you are interested in future work, but my responses may not be as quick as I'd like.

Nice parts.

85RZwade · May 06, 2025, 03:39:26 PM

Sorry for your loss, Chris

grcamna3 · May 12, 2025, 12:12:57 AM

Quote from: 85RZwade on May 06, 2025, 03:39:26 PMSorry for your loss, Chris

I recently lost my Mother also;I hope you're getting through it Chris.

sav0r (CL MotoTech) · July 17, 2025, 07:53:11 PM

A number of folks have reached out to me recently. All, I appreciated the thought and well wishes.

I am back working regularly again. My sister and I more or less finished closing my mother's estate, at least all the big stuff, at the end of June. I got a new cat out of the deal and that's been pretty great!

Anyways, hit me up if you have any interest in some work.

News:

Various Machining Services