• Welcome to 2 STROKE WORLD .net.
 

Front wheel assembly RD400C

Started by Membername, July 04, 2019, 06:50:33 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Membername

I put the front wheel in and torqued it to 70 foot lbs.  the speedometer is in the groove on the left fork.  Is this gap normal on the left side? (Green arrow)

Thanks,
Karen


Jspooner

There should be a gap there. Loosen the clamp on the bottom of the fork slider so the fork leg can relax and then tighten it back up. Whatever gap is there is fine. The shoulder of the axle is actually up against the speedo drive and holding it in place.
"Just quit brain fucking it and get it done"