- Welcome to 2 STROKE WORLD .net.
2 STROKE WORLD
Recent posts
#1
Turning Wrenches / Re: Pro-X piston ring question
Last post by m in sc - Today at 08:12:14 AMyou sure thats right? typically the wider ring (more cross section) is the top ring. the one oyu have labeled as 'top' is thinner to make room for the expander but if its marked that way.. ? weird.
id do a compression check after 2-3 heat cycles see where you are.
id do a compression check after 2-3 heat cycles see where you are.
#2
General Chatter / Re: RIP Frame Maker
Last post by busa1300 - Today at 04:09:57 AMVery sorry to hear that.
I had first seen the bikes he was building on the customfighters forum many years ago, and seriously impressed then by the bikes he was thinking up. Hopefully he wasn't suffering long.
I had first seen the bikes he was building on the customfighters forum many years ago, and seriously impressed then by the bikes he was thinking up. Hopefully he wasn't suffering long.
#3
General Chatter / Re: RIP Frame Maker
Last post by pdxjim - Today at 01:16:45 AMThis just blows my mind.
Riding dirtbikes has always seemed so safe compared to street riding.
Although we never met, Julian seemed like such a nice and incredibly talented soul.
Each day we have here on Earth together is a blessing not to be taken for granted.
Riding dirtbikes has always seemed so safe compared to street riding.
Although we never met, Julian seemed like such a nice and incredibly talented soul.
Each day we have here on Earth together is a blessing not to be taken for granted.
#4
Turning Wrenches / Re: Pro-X piston ring question
Last post by rdsarefun - May 19, 2024, 08:26:14 PMFired it up today, engine seems very lethargic as compared to before. Let it warm up 5 minutes, going to retorque cylinder head to 15 ft pounds and then run again, set timing. Head was modified (squish band), assuming I need to readjust timing.
#5
Show Off / Re: Gap pics ,, killboy, from ...
Last post by SoCal250 - May 19, 2024, 01:05:47 PMCool pics 
Looks like a good time
Looks like a good time #6
Show Off / Re: Gap pics ,, killboy, from ...
Last post by msr - May 19, 2024, 10:21:31 AMSweeeeet. I bought one of the 400 I need to put up here.
#7
eBay/FB Marketplace/Craigslist watch / Re: EBAY INSANITY (sticky thre...
Last post by SoCal250 - May 18, 2024, 11:35:53 PM1 pilot jet for $46.00!
https://www.ebay.com/itm/276471647811
New OEM Yamaha 367-14342-22-00 Pilot Jet #44 NOS
"Pilot Jet #44 is new and in good condition, not in original packaging."
US $45.99/ea
The # 48 is only $35.00
New OEM Yamaha 396-14342-24-00 Pilot Jet #48 NOS
US $34.99
https://www.ebay.com/itm/276471647811
New OEM Yamaha 367-14342-22-00 Pilot Jet #44 NOS
"Pilot Jet #44 is new and in good condition, not in original packaging."
US $45.99/ea
The # 48 is only $35.00
New OEM Yamaha 396-14342-24-00 Pilot Jet #48 NOS
US $34.99
#8
General Chatter / Re: RIP Frame Maker
Last post by SoCal250 - May 18, 2024, 04:14:53 PMWow, this is terrible and very sad news. Ken, I am deeply sorry for the loss of your friend. He was an amazing guy. My condolences to his friends and family.
#9
Turning Wrenches / Re: Pro-X piston ring question
Last post by rdsarefun - May 18, 2024, 11:52:30 AMThanks Mark, i managed to upload some pics and you can see that it looks nothing like the pic in generic instructions. I made a typo though, the second ring is thicker, wanted to clarify for future reference Second ring is .059", top ring is .046"
Thanks, Brian
Thanks, Brian
#10
Turning Wrenches / Re: Pro-X piston ring question
Last post by m in sc - May 18, 2024, 11:45:55 AMthey typically go under the second ring, most people leave them out. its just an expander ring, not an oil expander ring.