Hi guys
So iam looking at diagram the Best i can but Cant seem to see where i have done wrong.
Can anyone tell me Which colour wiring the 2 wires from the rear brake sensor, goes in to?
As well as tail light
Because i can get rear light to work and the front brake light but not the rear brake ( only made rear brake light work by trial and error and then the tail light did not work)
Would be Very nice to have this done as Its the only thing not working
In the tech library of this site http://www.2strokeworld.net/forum/index.php?action=dlattach;ts=1549919620;topic=35.0;attach=62 (http://www.2strokeworld.net/forum/index.php?action=dlattach;ts=1549919620;topic=35.0;attach=62)
Which is the one i used 🤔
Just cant seem to spot the fault, i Mean, it just wont work 🙄
Here's what the yellow and light brown wire to the rear brake switch look like. There are short extensions between the harness and the switch with the same colors.
(https://i.ibb.co/QDgP3w8/20210701-165241-1.jpg) (https://ibb.co/Vw1gc4H)