2 STROKE WORLD .net

The 2-Stroke Garage => Turning Wrenches => Topic started by: rickdecollo on August 13, 2019, 06:35:07 PM

Title: Rd350 needle jet
Post by: rickdecollo on August 13, 2019, 06:35:07 PM
Hello
I've got 3 rd350s, 2-'74s and a 73. All but one bike has y30 needle jets. I'm assuming these are aftermarket... I believe I bought from hvc. Is there any difference between these and a stock 5i4 needle? Someone told me not to use aftermarket needles but I can not locate the 5i4 needle. Does anybody have any input on this?
Thanks much!!
Title: Re: Rd350 needle jet
Post by: teazer on August 13, 2019, 07:21:52 PM
That sounds like a Keyster part number and should immediately be hammered into a wall or recycled.  :whistle:

On the other hand, if you bikes run fine with those needles, I'd suggest you just keep running them.

I have not measured a Y30 needle but the after market needles I have measured vary from slightly different to totally different to the OEM needles they were supposed to replace.  I don't have an alternate needle to the 5I4.  The needle closest to that is 6DL30 and it's 5mm longer and would probably need to be shortened.

Title: Re: Rd350 needle jet
Post by: rickdecollo on August 13, 2019, 07:47:20 PM
Thanks for the reply. My other bike runs ok but this one has some issues and I would
Like new needles. Where could I find some used parts? I would think these would be everywhere
Title: Re: Rd350 needle jet
Post by: Jspooner on August 13, 2019, 07:52:31 PM
I might have some. I'll take a look later tonight.
Title: Re: Rd350 needle jet
Post by: rickdecollo on August 13, 2019, 08:36:27 PM
Awesome let me know!!
Title: Re: Rd350 needle jet
Post by: Jspooner on August 13, 2019, 11:57:03 PM
Quote from: rickdecollo on August 13, 2019, 08:36:27 PM
Awesome let me know!!

Of course I could only find one, I'll have to dig a little deeper to find another.
Title: Re: Rd350 needle jet
Post by: rickdecollo on August 14, 2019, 12:10:26 AM
Thanks for looking. If you happen to find another and would like to sell just reply here and I'll get in touch with you.
Title: Re: Rd350 needle jet
Post by: Jspooner on August 14, 2019, 01:20:03 AM
Quote from: rickdecollo on August 14, 2019, 12:10:26 AM
Thanks for looking. If you happen to find another and would like to sell just reply here and I'll get in touch with you.

Found another.
Title: Re: Rd350 needle jet
Post by: rickdecollo on August 14, 2019, 07:34:19 AM
What kind of shape are they in? If you can, email me rickdecollo@rocketmail.com and let me know how much you would like for them.
Title: Re: Rd350 needle jet
Post by: m in sc on August 14, 2019, 09:49:25 AM
they will be wayyy better than those stupid yl ones.
Title: Re: Rd350 needle jet
Post by: Jspooner on August 14, 2019, 11:12:03 AM
Quote from: rickdecollo on August 14, 2019, 07:34:19 AM
What kind of shape are they in? If you can, email me rickdecollo@rocketmail.com and let me know how much you would like for them.

They will be fine, I will email you.
Title: Re: Rd350 needle jet
Post by: rickdecollo on August 14, 2019, 08:46:18 PM
Your email went to my spam. I wrote you back... if you do not get it check spam!