Swingarm dia

[rodneya]

Anybody know the od of the swing arm on a RD350?

[sav0r]

As I recall it's like slightly over 1.25", something like 1.26" or something odd like that. It doesn't come out to an even metric size either.

[soonerbillz]

So I guess you didn't take that guy's advice on Facebook and just measure it?   
... sorry.. couldn't help that. LOL
Anyways.. I'll measure my R5 and RD250 tonight and reply if that helps.

[rodneya]

So I guess you didn't take that guy's advice on Facebook and just measure it?   
... sorry.. couldn't help that. LOL
Anyways.. I'll measure my R5 and RD250 tonight and reply if that helps.

Yep, ask a simple question and get a semi retarded answer.
I measured mine on the weekend, but cant find where I wrote it down and my brilliant memory has already forgotten exactly what it was.
I can remeasure again tonight, but I kinda wanted to work something out now.

[sav0r]

I measured 1.265" with paint.

So yeah, I was spot on.

[m in sc]

rd250/350/r5 use the same swingarm.

i just measured the 75 here. 31.85mm with factory original paint...... or 1.2539"

[sav0r]

I measured in like 5 spots and the only place mine is 1.25 is down near the dropouts. The rest is 1.26" or more. But my paint could be thick. .005" on D is suppose isn't unreasonable.

[m in sc]

measured dead in the middle with stock paint.

[sav0r]

2 part epoxy on mine.

It's odd they didn't pick 1.25" or 32mm.

[rodneya]

Thanks gents

[m in sc]

id bet its 1.25" spec and slightly misformed in welding and handling and such.