this is an adapter for a blue or gold dot caliper to be used on aircooled rd250/350/400 front forks. use at own risk. Mine is made of 6061 aluminum. you will need to run an fzr600 or like rotor, and make a **EDIT**13mm OR 1/2" spacer behind the rotor. (center of a stock rd rotor hat also works)
this is a link to the zip file which contains a .dxf of the main adapter. https://2strokeworld.net/wp-content/uploads/2019/03/brakeadapter-r6-rd-v4.zip
i would recommend a MINIMUM thickness of 3/8" no bigger than 1/2" feel free to take the linework and modify to suit your cosmetic needs.
I JUST have the adapter in DXF format available. Any decent machine shop can get this cut, or water jet or laser shop.
This is MY file, do NOT copy and make as batch and sell for a profit, please. This is strictly for personal use for projects. If you do, and i find out, i will expose you and any personal data i have on you for the dirtbag you are. You have been warned.
You will have to fit and finish the part yourself.
this is a link to the zip file which contains a .dxf of the main adapter. https://2strokeworld.net/wp-content/uploads/2019/03/brakeadapter-r6-rd-v4.zip
i would recommend a MINIMUM thickness of 3/8" no bigger than 1/2" feel free to take the linework and modify to suit your cosmetic needs.
I JUST have the adapter in DXF format available. Any decent machine shop can get this cut, or water jet or laser shop.
This is MY file, do NOT copy and make as batch and sell for a profit, please. This is strictly for personal use for projects. If you do, and i find out, i will expose you and any personal data i have on you for the dirtbag you are. You have been warned.
You will have to fit and finish the part yourself.