Messages

Hi SC ,

I have assembled it , will have to check the solder test,

I even CNC cut the 1.5mm Copper head gasket but that worsen the performance ,bike is bogging and over heating as well , though it gave me 100 PST compared to 115 with USA heads with 1mm gasket.

I am going to look for and install Indian spec HT heads as I believe the combustion chamber or Dome is also different with USA, HT and LT heads ..

Cheers,
Pravin

I am trying to run Tavian Barrels which are Indian HT Spec , exhaust at 31mm , with USA Heads and we are thinking the compression when engine is on is too much to handle for the Points ignition.

I am not able to get hands on a HT Indian spec HT heads which has around 1.5mm squish compared to USA spec heads ..

Have anybody tried thicker head gaskets? like 2 mm thick ?

Cheers,
Pravin

Thanks RD400:)

Indian RDS came with RD400 petals , there is no Dovel mark though as I have replaced the Blocks ..

Hi ,

I am replacing my manifolds , and I forgot the orientation of the reeds , there is on L cut and One \ cut petal each side of the reed and I forgot which petal side goes up and which stays down ,

Does anybody recollect ?

Cheers,
Pravin

I had seen his exhausts on bikes in pictures and ebay and always heard good words and praise for them!!!

And now days I guess its impossible to get one even used : (

Pravin

Superb !!

WHat is the model for 4 cylinder Blue bike ? Shes  crazy ..

Cheers,
Pravin Dalvi

was a block buried via a proxy ip address.glad it's smoother for you now, sorry about that.  def NOT my area of expertise BUT I stumbled thru it

Super !! Thanks a lot Sir  :)

Nice place to be !! Thanks for sharing :)

I am able to access the forum now without VPN ... thanks a lot !!

Thanks Tom for the contribution

Rest In Peace 🙏

i'm still getting the same, but only on my laptop. if i don't log out i get this same message and have to log out - then it goes normal, then log in again. if i do log out i just have to log in and everything ok. weird, but true 
cheers, gil.
p.s. on the p.c. it's fine, just this bloody laptop.

I tried with edge and Firefox and still same , not i tried a VPN and connected to uk on my cell and it's working .

Does it has to do with the website provider ? I am quite sure some where the ips are blocked not at the website admin level but at the provider level ?

Any network expert here ?

Cheers
Pravin

Hi SC ,

I have pinged you my IP and Email , let me know when i can try without VPN : )

Cheers,
Pravin

I put grease on then, in the hope they come apart cleaner

Yes grease on both sides and done ..

Hi SC ,

I got this new laptop and am still facing same issue , attached is the error. I just happen to try express VPN and selecting UK as location to connect and am in : )

I feel something to do with whitelisting ? Good to be back in after so long for a month atleast untill the free trail expires..

Can you please check if there is anything to rectify ? I cant access on mobile also using 2 service providers : (


Cheers,
Pravin