Rd400 wont start on ignition /relay

[rd400greenhorn]

Yes so i was testning wiring in the back on the rear brake light.

Everything works Besides that and now All the sudden i Cant hear the relay switch when tuning the key over and No light. Its dead.

Battery is fully charges and it seems All fuses are intact.

What the??

[rd400greenhorn]

Vape ignition btw

[rd400greenhorn]

Okay wtf.
It lights up now.. 🤔 Will investigate

[rd400greenhorn]

So iam blowing fuses by trial and error on the few remanining wires in the rear 3ne or the bike.

Just Cant seem to hack the config of tail light on and rear brake switch activation.

Its either rear light on, front brake light works
Or rear light off, rear brake light work

[rd400greenhorn]

So there is only 2 wires under the seat that goes to the tail, that are power in as now.
The yellow has when i acticatw the front brake and the Brown next to it, is constant 12 v when ignition is on.

And in the headlight it seems as if i have connected the front brake right. One wire to yellow/green ( this ends up yellow in the back) and one wire to oil lamp i believe it is?