Topics

https://www.ebay.co.uk/itm/225725059052?mkcid=1&mkrid=710-53481-19255-0&siteid=3&campid=5337705843&toolid=20008&mkevt=1&ul_ref=https://rover.ebay.com/rover/1/711-53200-19255-0/1&fbclid=IwAR1ZHN87Y46FTOY-ZAJxa_8Yqm3ZoZYJjGKCeuO9ScfWwciznA9SipOboRs

$$$$$$$$$$$$

https://www.facebook.com/marketplace/item/146558018456362/

M

Should see the listing on Ebay tonite.

Let me know of any other comments I should or should not put in

M

Recently got a bike, that had some bubbles in the re-paint.

I was thinking of a hypodermic needle to remove the air, then add some adhesive back in.  Then rubber roll down

Anyone try this or have another option.

Dont really want to repaint.

M

https://www.facebook.com/marketplace/item/803561287959159/

https://bringatrailer.com/listing/1985-yamaha-rz-500-2/?fbclid=IwAR2bt78-on18_SjlGUA4xjl_94jR3_WB6mMojx5WrCkslwQv6Pbkjvai1w4

Anyone know where to get these emblems?
I'm still searching also.

M

Who can do it

so I had some small fiberglass patching to do yesterday.
Wanted to get it to harden faster.

I looked it up on the net.
First thing i saw was it is an Exothermic reaction = gives off heat when curing

second thing I saw in same sentence, was to put it in the sun or add heat to make it cure faster.

Well according to basic chemistry, those 2 things are exact opposite of each other.

To increase the rate of an exothermic reaction, you would remove the heat in order to drive the equation to the " Products " side.

For endothermic reactions, heat would drive the reaction faster.

M

https://lasvegas.craigslist.org/mpo/d/san-francisco-1979-yamaha-daytona/7617363581.html

So I have a bike, that every 3 - 4 days the battery is going dead.
so there is a short somewhere.
Or a part that is not working.

I will start at the battery & follow the wiring.
This topic has been posted before, so was there a common cause for this?

M

I suggest you guys start saving the corks, for future use

https://dallas.craigslist.org/ndf/mcy/d/denton-1984-yamaha-rz-complete-nut-and/7624254773.html

I have a bike I am looking at in Toronto.
Last one I got from Canada, the owner drove across, & $450 later, with Haul bikes I had it here in a month.

This owner wont do that.
I have checked shipping & its anywhere from $1500 to $2300.
Plus customs to get it here.

Anyone have other thoughts on options.
As this does not seem doable

This lever was on one of the bikes that I purchased.
I have since removed it, and went back to stock, as it hit the gauge cluster.

Seems to have some sort of adjustment dial on it.

I probably wont be installing it, so if anyone has a use for it.

M

I have 2 exhausts here. One stock.
One DG.

What a difference in diameter the stock one is.

 

Tried to log in on my phone last night.

I guess the site got mad at me

Have a Yamaha LT that the healite did not work.
Took apart to put in an LED one.

Took old bulb out.
Went to clean shell & all the chrome came off.

I got the Krylon chrome paint.
You cant touch it whe it dries, or it leaves a mark.

Anyone come across some other options?

M

https://www.facebook.com/marketplace/item/1661721840938332/

https://www.ebay.co.uk/itm/125930576623


Has this been up before?