Jets for tm34mm carbs

[rd400greenhorn]

Hi guys

Where do I get All the jets and trimmings for tuning my 34mm TM carbs?..

[SoCal250]

Not sure where in Europe, but in the U.S. I use John at Economy. Another good source for Mikuni jets and parts is Sudco, one of the largest distributors for Mikuni in the States

[preben54]

Hi ,I have bought from Niche Cycle ,google it ,lots of mikuni parts

[Tuck]

+1 for Niche, That's where I get mine and super fast shipping.

[Redbird]

I've used Jets-R-Us with no issues.

[SUPERTUNE]

They use the common VM pilots (vm22/210) and hex main jets (4/042), except the 389 series needle jet.
Shouldn't be hard to get.
Put in the jets I sent you...it will be very close, set needle clip on #4.
45 pilot, 310 main, (you might need a 300,290 after breakin) P8 needle jet.
Chuck

[Dvsrd]

https://www.mikuni-topham.de
In Germany, or

http://www.allensperformance.co.uk
In the UK

Both are very good and helpful.

[rd400greenhorn]

They use the common VM pilots (vm22/210) and hex main jets (4/042), except the 389 series needle jet.
Shouldn't be hard to get.
Put in the jets I sent you...it will be very close, set needle clip on #4.
45 pilot, 310 main, (you might need a 300,290 after breakin) P8 needle jet.
Chuck

I Will :) Those you sent are for Breaking in as Well ? Just so Iam sure 😅👍

[rd400greenhorn]

Thanks guys for all the links and info, appreciated