Messages

if it's a stock cable, won't work with the new VM28's.

we could ship you one first class mail if you call the order in and ask. or we have them on ebay below. Our shipping on the website is flat rate so for most orders works out to the customer's advantage.

https://www.ebay.com/itm/123726816521

"it might be a little small but it's rock hard"

Economy Cycle

https://www.economycycle.com/shop/yamaha-rd250350400r5ds6ds7-parts/fuel-and-airintake/carburetor-rebuild-kits-parts-related/carburetor-parts-carburetor-rebuild-kits-parts-related/misc-carb-parts/injector-nozzle-rd250350400-carb-oil-injector-nozzle/

New one on the left, original on the right that came in with a bike, customer said he's having trouble getting it to fit

[Note these are for the RZ350 only, not the RD350 or LC350]

Due to the high cost of cush drives from Yamaha for the RZ350 ($120), A few guys asked me to have some made up. These also fit the FJ600, FZ600 and Maxim. These are $34.95 for the complete set.

Note these are for the RZ350 only, not the RD350 or LC350

Forum discount RDTECH gets you an additional 10% off. Enter in the coupon box at checkout.



Link to purchase
https://www.economycycle.com/shop/yamaha-rz-350/frame-related-yamaha-rz-350/wheel-bearings/yamaha-rz350-cush-drive-also-fits-fj600-fz600-radian-29l-25364-00-00/

We also had Samco make up some hose kits in a natural look rubber finish, still silicone but look more like the originals with a matte finish, no printed logos on the natural ones.



Link to purchase - on sale (these are the pricey ones from the UK, we also have silicone hoses (Chinese) no labels or logos for $24.50 - see second link below)
https://www.economycycle.com/shop/yamaha-rz-350/engine-related-yamaha-rz-350/radiator-hoses/silicone-radiator-hose-set-by-samco-rz350-multiple-color-choices/

Link to Chinese hoses (sold a lot of theses over the last few years, not a single complaint)
https://www.economycycle.com/product-category/yamaha-rz-350/engine-related-yamaha-rz-350/radiator-hoses/

There use to be a write up on the old forum with pics. Anyone have those or a link? I tried searching the old form but doesn't seem to work.

Call me when you need something next, we'll apply the missed discount to your next order.
john

keep the slack out of the crossover line to keep the quick disconnect up and away from the engine, or the heat will get to it over time and leak

He's a great tuner, but also just a very nice, professional, straight up guy.  best of luck with the new ventures.

Thanks Rob, much appreciated
John

 

After spending several thousand $ there recently; I find out there's a discount code? 

Not sure who that is, Matt B maybe? Anyway we'll work something out for you on the missed discounts, call me next time you need something.

Thanks very much guys, much appreciated!

I know your asking for a 350, but just thought I would throw this out there... I was using vm32 before I got the TM34's (Thank you Chuck). Jetting I ended up with was,  320 main, 45 pilot, 159-P2, 6DH3, 2.5 slide. 

Thanks Tuck, very helpful
John