I just found the forum again, figured since received this magazine yesterday I would share. I was about to make some big changes when I got the call about the magazine shoot so I waited. Now I get to dig in and freshen her up with some new parts.
(https://uploads.tapatalk-cdn.com/20191011/3890feca8460dbbdc3265e5931e2664e.jpg)(https://uploads.tapatalk-cdn.com/20191011/6d05e4f2df3e8b8a1a30f6fda8f0f1af.jpg)(https://uploads.tapatalk-cdn.com/20191011/144d4eac930f7cbad761a1ccce93fc2a.jpg)
Can't wait to see the pics!
All fixed 👍
Dave! Welcome back
Congrats on the mag feature! :clap:
素敵なバイク、そして雑誌の記事でおめでとうございます。 :thumbs:
:agree: LOL nice post Tuck!
Quote from: Tuck on October 11, 2019, 10:39:31 PM
素敵なバイク、そして雑誌の記事でおめでとうございます。 :thumbs:
Thank you, it was in an English magazine too. 😂
Quote from: SoCal250 on October 11, 2019, 09:39:55 PM
Dave! Welcome back
Congrats on the mag feature! :clap:
Thank you sir, took me a while to find it again. Sucks most of the content is gone.
Here's the magazine from many years ago, minus one page that I must have deleted on accident.
(https://uploads.tapatalk-cdn.com/20191012/87925fe7f0c8f3b857184dc579c18d28.jpg)(https://uploads.tapatalk-cdn.com/20191012/6fb111e3dcd37cbd5c777c3df361e4f8.jpg)(https://uploads.tapatalk-cdn.com/20191012/eefccfe2883effecdd51d8f5ad82c80f.jpg)
Sent from my iPhone using Tapatalk
I've got that magazine somewhere, I'll see if I can scan the other page.
Quote from: biggraham on October 12, 2019, 12:03:32 AM
I've got that magazine somewhere, I'll see if I can scan the other page.
No big deal, I have the magazine, just didn't have it on my phone, I'm at work right now.
First and easiest change, new cans. Finally dumped the Spec2's. (https://uploads.tapatalk-cdn.com/20191013/9dcde2cdf33c50682289a86e7beaa6b7.jpg)
Sent from my iPhone using Tapatalk
Next up, just waiting for powder coating.
(https://uploads.tapatalk-cdn.com/20191025/36b151d955a60dbb690bf1c2325eb59d.jpg)
Sent from my iPhone using Tapatalk
Dry Clutch, what does that come from?
Quote from: tony27 on October 26, 2019, 08:21:25 PM
Dry Clutch, what does that come from?
the side cover and input shaft are from Fondseca, everything else is tz250/350.
(https://uploads.tapatalk-cdn.com/20191107/838d955c46691643ea8ca817beeafcf3.jpg)
Sent from my iPhone using Tapatalk
Looking forward to this clutch install take lots of pictures .
I finally got the clutch cover, it was the hardest part to find. The resin replicas are easy to come by but not these. Waiting on some parts to get the oil pump mounted, it's not the same bolt pattern as the water pump of course. Next hurdle is making a longer input shaft for the oil pump.
(https://uploads.tapatalk-cdn.com/20191116/5690dd92ccced93fc4da751f80ecc95c.jpg)
Sent from my iPhone using Tapatalk
Finally got this thing together. It took quite a bit of massaging of several parts to get it all to work. I'm running an oil pump in place of the water pump for now. Waiting for a couple bits to get the top end all finished up.
(https://i.ibb.co/6H97zth/1-EC2-DBFF-1825-475-C-9-EB6-4-AFA00-D84210.jpg)
I have friction plates for a dry clutch if you need 'em: 3YL-16321-01 and 3AK-16321-00, NOS still in their little bags.
Quote from: 85RZwade on April 22, 2020, 10:23:03 PM
I have friction plates for a dry clutch if you need 'em: 3YL-16321-01 and 3AK-16321-00, NOS still in their little bags.
Thanks, I have a stack of them.
I would be interested in a breakdown of what you had to buy (it's cost) and modify. I'm thinking this might be a good upgrade to my racing RD400. I've only seen one other RD400 with a dry clutch and that was at Barber.
Rob
Beautiful bike and attention to detail
You need to update your chain adjusters as well Dave 😁....you know where to send them😂😎.
Quote from: 202wagon on June 21, 2020, 02:40:13 PM
You need to update your chain adjusters as well Dave 😁....you know where to send them😂😎.
😂