Print Page - Clutch change 75 RD 350

Title: Clutch change 75 RD 350
Post by: Kawtriplefreak on April 29, 2019, 06:23:13 PM

(https://i.postimg.cc/cHs4Jg1X/20190429-134149.jpg) (https://postimg.cc/d7xKH0yy)

Title: Re: Clutch change 75 RD 350
Post by: Kawtriplefreak on April 29, 2019, 06:59:39 PM

(https://i.postimg.cc/76mPJHfD/20190429-134226.jpg) (https://postimg.cc/hzQRHqL3)
Giving the FZR fibers a soak...

Title: Re: Clutch change 75 RD 350
Post by: Kawtriplefreak on April 29, 2019, 07:06:11 PM

All buttoned up. Filled with Lucas 80/90, run, rechecked and refilled. Adjusted 1/2 turn out from adjuster bottoming and maybe a 1/4 inch at the lever. It doesn't slip now. But it does rattle a bit ocassionally on deceleration and the noise changes as you move the clutch lever. I consulted the good Dr. Haase and was told all is well.
(https://i.postimg.cc/q7Hv9DPf/IMG-20190429-145153-01-01.jpg) (https://postimg.cc/NKbtXDGb)

Title: Re: Clutch change 75 RD 350
Post by: quocle603 on April 30, 2019, 10:44:14 AM

:clap: :clap: :clap:

Title: Re: Clutch change 75 RD 350
Post by: m in sc on April 30, 2019, 10:59:00 AM

last time we just threw that bike on its side and cavemanned it. :taz:

https://youtu.be/ozcd8pl0oyc

(time lapse vid of the initial build from 6? yrs ago)

Title: Re: Clutch change 75 RD 350
Post by: Kawtriplefreak on April 30, 2019, 08:38:02 PM

Yeah we did :metal: :metal:

Title: Re: Clutch change 75 RD 350
Post by: SUPERTUNE on May 02, 2019, 08:07:52 AM

Now that takes us Back to the old shop!!!
See you guys next week at the meet!
Chuck

2 STROKE WORLD .net

The 2-Stroke Garage => Turning Wrenches => Topic started by: Kawtriplefreak on April 29, 2019, 06:23:13 PM