Print Page - rz 350 with zealtronic ig. need ig. curve

Title: rz 350 with zealtronic ig. need ig. curve
Post by: h2ken on September 23, 2021, 04:06:29 PM

Hi guys, working on a rz350 US with zeeltronics ig with powervalve control, has y boot early wicked racing pipes. Looking for an ignition curve.. Gots one?? Thx ken

Title: Re: rz 350 with zealtronic ig. need ig. curve
Post by: m in sc on September 23, 2021, 05:23:26 PM

Tim has a curve i sent him off my rz that works really, really well. I don't have my rz anymore but he still has his. Kawtriplefreak on the forum, shoot him a PM.

:clint:

Title: Re: rz 350 with zealtronic ig. need ig. curve
Post by: rodneya on September 23, 2021, 05:43:47 PM

Jim from Fast from the Past loaded this curve on my Zeel when I bought it. Its a 421 so I dont use the powervalve settings.

Title: Re: rz 350 with zealtronic ig. need ig. curve
Post by: busa1300 on September 24, 2021, 07:34:35 PM

I would contact Borut from Zeel, and see all the different versions he has...there should have been two loaded when you bought it.

Title: Re: rz 350 with zealtronic ig. need ig. curve
Post by: m in sc on September 27, 2021, 08:20:34 AM

these are the 2 curves i had loaded on mine. as far as the power valve, i think i was at 0% from 100 rpm to 4000 rpm, 60% at 6k, and 100% at 8500-12k. I had the curve switch so i could jump between the 2.

2 STROKE WORLD .net

The 2-Stroke Garage => Turning Wrenches => Topic started by: h2ken on September 23, 2021, 04:06:29 PM