Text only | Text with Images

2 STROKE WORLD .net

The 2-Stroke Garage => Turning Wrenches => Topic started by: m in sc on October 07, 2020, 08:32:28 AM

Title: stock rd350/400 foot rest bracket compatibility q
Post by: m in sc on October 07, 2020, 08:32:28 AM
I'm not sure on the swappability. friend of mine has (just got) an rd400 with no foot peg rest. (stock, front pegs)  will a 350 one bolt on?

thanks.   :patriot: 
Title: Re: stock rd350/400 foot rest bracket compatibility q
Post by: Striker1423 on October 07, 2020, 08:53:58 AM
Need measurements? My motor's out and I have full view of the brackets.

EDIT:
Center to center I get around 2 5/8" for the bracket itself, then 6 1/2" center to center on the bracket to bracket width.
Title: Re: stock rd350/400 foot rest bracket compatibility q
Post by: m in sc on October 07, 2020, 12:23:04 PM
sweet. will pass info on.

:clap:
Title: Re: stock rd350/400 foot rest bracket compatibility q
Post by: 1976RD400C on October 07, 2020, 12:54:59 PM
These are 350 pegs and a 400 frame. The holes in the 400 frame look to be 1/2 narrower if you line up everything center to center.

(https://i.ibb.co/vq0NVRx/20201007-093720.jpg) (https://ibb.co/H45cB3D)
Title: Re: stock rd350/400 foot rest bracket compatibility q
Post by: msr on October 07, 2020, 01:48:45 PM
Yep, my measurements show a similar difference. About 6 1/4" center to center, bracket to bracket, making it just a little bit narrower in the 400 frame. Just different enough to not bolt on without some 'help'.

Thanks for giving it a look, guys.

Matt
Text only | Text with Images