What say ye?
Put your tongue on it.
Looks like it's from the flasher unit...
Quote from: AAAltered on December 05, 2021, 12:19:22 PM
Looks like it's from the flasher unit...
That could make sense considering they don't flash
Yellow wire 'should' be for the tail/brake light circuit. Turn signal wires to and from the flasher relay are Brown and Brown/White. But I can see that 'should' means very little considering the connector on the end. :umm:
Quote from: DesmoDrew on December 05, 2021, 01:34:21 PM
Yellow wire 'should' be for the tail/brake light circuit. Turn signal wires to and from the flasher relay are Brown and Brown/White. But I can see that 'should' means very little considering the connector on the end. :umm:
Ha! I'll give it a look see tonight. Just put 50 miles on her. Running like a top.
who knows. victim of a bad previous repair but i'd venture to guess it was used for the ground wire at the flasher mount. at least its not lampcord.
Quote from: m in sc on December 05, 2021, 04:54:37 PM
who knows. victim of a bad previous repair but i'd venture to guess it was used for the ground wire at the flasher mount. at least its not lampcord.
RIGHT!!!!! As long as it is running well, the other stuff is pretty easy to puzzle out. :cheers:
Anyone got a pic? My manual is at the shop with my 250.
https://i.pinimg.com/originals/5d/7d/14/5d7d14eb588e9e6c198356c7f93b25b5.jpg