Hi. Anyone know of an anodizing service that could do my DG heads. They are for my Daytona. My stock Daytona head is fine but needs cleaning/ polishing. I just figure when I sell the bike it needs to look good with either set of head/heads. They have been cut an o ringed by Scott C. Any help with this service appreciated.
I had it done around 10 years ago, and I'm 99% sure it was these guys. They did it all by voice and US Mail. I used a stock gold that is so close nobody would know. I also sent my DG Swinger at the same time so there's a dead match.
http://www.colorsinc.com/ (http://www.colorsinc.com/)
These guys sell the reproduction Swingarm stickers:
https://www.fastguystuff.com/SearchResults.asp?searching=Y&sort=13&search=dg&show=40 (https://www.fastguystuff.com/SearchResults.asp?searching=Y&sort=13&search=dg&show=40)
Before and After
(https://i.ibb.co/fQcD2V3/23-ADA601-5781-43-F4-96-A3-3200-D39-E2841.jpg)
(https://i.ibb.co/zHbjQJt/381-E6-B03-1-FA7-475-C-AE6-A-5-E87-CFEC1-CCC.jpg)
(https://i.ibb.co/qkH9W2H/F1164052-5736-4029-AE6-E-D3-BA340-ECF6-A.jpg)
mcnichols plating in the detroit area can do it