Hi guys
Where do I get All the jets and trimmings for tuning my 34mm TM carbs?..
Not sure where in Europe, but in the U.S. I use John at Economy. Another good source for Mikuni jets and parts is Sudco (http://www.sudco.com), one of the largest distributors for Mikuni in the States
Hi ,I have bought from Niche Cycle ,google it ,lots of mikuni parts
+1 for Niche, That's where I get mine and super fast shipping.
I've used Jets-R-Us with no issues.
They use the common VM pilots (vm22/210) and hex main jets (4/042), except the 389 series needle jet.
Shouldn't be hard to get.
Put in the jets I sent you...it will be very close, set needle clip on #4.
45 pilot, 310 main, (you might need a 300,290 after breakin) P8 needle jet.
Chuck
https://www.mikuni-topham.de
In Germany, or
http://www.allensperformance.co.uk
In the UK
Both are very good and helpful.
Quote from: SUPERTUNE on May 21, 2019, 09:25:44 AM
They use the common VM pilots (vm22/210) and hex main jets (4/042), except the 389 series needle jet.
Shouldn't be hard to get.
Put in the jets I sent you...it will be very close, set needle clip on #4.
45 pilot, 310 main, (you might need a 300,290 after breakin) P8 needle jet.
Chuck
I Will :) Those you sent are for Breaking in as Well ? Just so Iam sure 😅👍
Thanks guys for all the links and info, appreciated :righteous: