Text only | Text with Images

2 STROKE WORLD .net

The 2-Stroke Garage => Turning Wrenches => Topic started by: AAAltered on June 13, 2019, 10:10:44 AM

Title: Anyone recognize these chain pullers
Post by: AAAltered on June 13, 2019, 10:10:44 AM
Sorting thru my parts stash, I know they aren't the same as my R5 nor RD200....
They appear to be identical.

What are they?

(http://i239.photobucket.com/albums/ff131/aaaltered468/A9C26D2F-293C-4F21-9870-587FDBCFE77A.jpg) (http://s239.photobucket.com/user/aaaltered468/media/A9C26D2F-293C-4F21-9870-587FDBCFE77A.jpg.html)
Title: Re: Anyone recognize these chain pullers
Post by: m in sc on June 13, 2019, 10:22:29 AM
look like rd ones. are they different hole sizes?
Title: Re: Anyone recognize these chain pullers
Post by: AAAltered on June 13, 2019, 10:36:20 AM
Holes are the same size on each, makes me think they are two "left" or "rights" for whatever they go to...
Title: Re: Anyone recognize these chain pullers
Post by: Cam on June 13, 2019, 01:05:26 PM
They kind of look like DT to me. These are from a 175 on Ebay.

(https://i.imgur.com/ZkMfmlFl.jpg)
Title: Re: Anyone recognize these chain pullers
Post by: Cam on June 13, 2019, 01:08:58 PM
Here is another, this fits RD125, DT1 and others.

(https://i.imgur.com/t5YC5cDl.jpg)
Title: Re: Anyone recognize these chain pullers
Post by: AAAltered on June 13, 2019, 01:44:40 PM
They do look like the first pic you posted, but not the second.  Note the outward "pucker" rather than inward.
Looking at eBay references they also look similar to XS bits.

Too bad, cause they are nicer than the ones I'm using.

Thanks
Title: Re: Anyone recognize these chain pullers
Post by: SUPERTUNE on June 13, 2019, 10:46:46 PM
I don't know what they are... but not RD.
Chuck
Text only | Text with Images