I have 2 kick stand and don't know which one is the correct part for an RD400. One mounts to frame by a screw that goes through and and nut. Second one is threaded and the bolt screws on to the stand through the mounting holes. Basically one has two same size holes and the second one has a large hole and the second hole is smaller and threaded. The stands look identical other than the mounting holes.
I Have 2 other RD's and each have a different stand on them.
My 350 is NOT threaded and uses a castle nut/cotter pin.
Quote from: AAAltered on March 03, 2021, 07:11:33 AM
My 350 is NOT threaded and uses a castle nut/cotter pin.
Same for both my 400s