Figured I'd start a build thread of my 74.
Plans are pretty much a stripped down Cafe treatment that is light and fun.
Heads and cylinders are currently at EC getting some work done.
Highlights as follows
New boring and porting, pistons and rings. Complete engine and trans rebuild.
KN Y boot
HPI Ignition
Will run premix
Progressive Series 12 Magnum shocks on the rear and Progressive springs in front.
Slipstream Cycles rearsets
Might upgrade the front brakes to FZR. Stopping might be important at some point.
I have old SpecII pipes that came with the bike. I just refinished them but I have my eye on JL Street in SS with a carbon fiber silencer.
All parts being media blasted and repainted/refinished.
I planned on doing a front end conversion to something a little more modern but I just had a lifter failure in my vette so I have to put some funds towards that. If anyone ever told you going fast is cheap, they're full of shit.
I'll update as I get things done but I'm OCD on things and pay close attention to detail and small things. It's a winter project and I have a daughter that is a 3 sport athlete and a son who wrestles so time is limited.
The guy I bought the bike from had some cool literature that some may enjoy.
(https://i.ibb.co/51snqk7/20231027-224732.jpg) (https://ibb.co/10RdHMS)
(https://i.ibb.co/KFxjcLq/20231027-224646.jpg) (https://ibb.co/ZWz6RY8)
(https://i.ibb.co/6t0TKqJ/20231027-224634.jpg) (https://ibb.co/rp2zBXf)
(https://i.ibb.co/HXtkHYB/20231027-224747.jpg) (https://ibb.co/YbcqL8P)
(https://i.ibb.co/dr692B6/20231027-224837.jpg) (https://ibb.co/MspTVnp)(https://i.ibb.co/b10YZPM/20231027-224754.jpg) (https://ibb.co/cJBRH1S)
(https://i.ibb.co/JnKhCcB/20231027-224916.jpg) (https://ibb.co/nrbWRwg)
(https://i.ibb.co/s2RDhkv/20231027-224856.jpg) (https://ibb.co/kxBrpkg)
Teardown began
(https://i.ibb.co/r2w1kBG/20230808-201026.jpg) (https://ibb.co/1GmwZCf)
Old SpecII pipes need help
(https://i.ibb.co/6RT646C/20230825-224844.jpg) (https://ibb.co/ccZzNzn)
Much better
(https://i.ibb.co/DpFLBbz/20231027-230249.jpg) (https://ibb.co/YZSb5WP)
I have probably read that "Carving Lines and Grinding Ports" a hundred times or more. The article features Gary Shumake (Spec2) as the engine tuner.
Nice build
Quick update. Fully disassembled frame is detabbed, holes filled and grinded smooth. Almost ready for paint.
(https://i.ibb.co/tD1DkwJ/20231113-195117.jpg) (https://ibb.co/CQSQNpH)
Waiting on a bunch of parts from Economy so I can start engine rebuild.
I'm so jealous when I see everyones garages.