I bought my first rd350 in March 2019. Didn't like the way it was, so I'm doing it all again.
Sent from my SM-G970U1 using Tapatalk
Too vintage for you...
Chuck
:) you got me there.
RD will be for the wife.
Here are some pics
https://photos.app.goo.gl/GcB9Po4BRCw8Jepa7
The bike will be completely stock except, stock replacement air filters and powerdynamo ignition.
Making progress on the rz while I'm waiting for rd crank
(https://uploads.tapatalk-cdn.com/20190730/0f19c3c2aa07b82aaabdb136f8ea060c.jpg)
Next is to wash and degrease the 500 & 350roller.
Will stop at home Depot on the way home to get plastic and rubber plugs to block off 500's inlet and exhaust.
Looks good so far.
Rob
Bead blasted the cases last weekend. Took the forks apart yesterday to rebuild and put new seals.
Inner tubes that came with the bike has rust and pitting. I'm yet to open the inner tubes I bought from @halmic.
Will share pics as I go(https://uploads.tapatalk-cdn.com/20190814/54503c21cd08537559948a0118ac4dcd.jpg)(https://uploads.tapatalk-cdn.com/20190814/fa45e8b136a5be6122b613f35d702ee7.jpg)
Installed new tapered steering bearings last night.
Will get the roller ready this weekend while I'm waiting on crank from Ed
Ed sent this pic yesterday. I should have it by mid next week.(https://uploads.tapatalk-cdn.com/20190822/01ec8d0b80e2c7e613188248e18560d6.jpg)
I took the fork apart. Lowers not looking good. So thinking of blasting, wire wheel and clear coating it this weekend.
Looks good.
Rob
Trying to put the bottom end together with 400 transmission(https://uploads.tapatalk-cdn.com/20191015/aaee4e64e870d4474c9e3e240b202a43.jpg)
Finished the back end(https://uploads.tapatalk-cdn.com/20191022/05d86700ba0c5ee0a9fbb661926a1fef.jpg)
Rotor refurbished at Truedisc.llc
(https://uploads.tapatalk-cdn.com/20191022/6c745ae37419df5b1f1254eb3aabb352.jpg)
Nice work, Sharath!
Sent from my iPhone using Tapatalk
Thank you!
Making progress(https://uploads.tapatalk-cdn.com/20191030/2eec52b95800b95dcb0309147f2899f2.jpg)
Shooting to finish on Friday night(https://uploads.tapatalk-cdn.com/20191114/b212232bcedc7210068eb7d448cb769f.jpg)
Beautiful Work,...Cant wait to see the finished product !
Hey! I know this guy! Nice project. If you ever come back to New England, and want to get rid of the RG500. LmK ;)
Quote from: quocle603 on November 14, 2019, 08:57:39 AM
Hey! I know this guy! Nice project. If you ever come back to New England, and want to get rid of the RG500. LmK ;)
not sure about the new england move but I am planning on selling my Pepsi. PM me if you need more info.
Hoping to finish and ride this weekend(https://uploads.tapatalk-cdn.com/20191120/fe2b54dfcc42d6a6221b86066a19796f.jpg)
Looks great :vroom: