Is anyone on here going to the Austin Motogp?
- Welcome to 2 STROKE WORLD .net.
2 STROKE WORLD
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages1
#2
Turning Wrenches / Re: Piston identification
November 16, 2024, 08:17:50 PM
Thank you!
I appreciate it!
I appreciate it!
#3
Turning Wrenches / Piston identification
November 16, 2024, 05:54:43 PM
Hello, I was wondering if someone can tell me what pistons I have in my 1976 RD400?
The inside of the piston says 1A100 and 6313. I think there might be some writing under the 6313 but I'm not sure.
Thank you.
Todd
The inside of the piston says 1A100 and 6313. I think there might be some writing under the 6313 but I'm not sure.
Thank you.
Todd
#4
Events / Re: 2024 2 STROKE EXTRVAGANZA PICS & VIDEOS
October 20, 2024, 12:32:55 PM
It was a great show again this year!
The guys motorcycle collection inside the building is downright shocking! I was blown away by the quality and amount of motorcycles he has!😊
The guys motorcycle collection inside the building is downright shocking! I was blown away by the quality and amount of motorcycles he has!😊
#5
General Chatter / 2 stroke extravaganza
May 16, 2024, 08:38:01 PM
Hello,
Does anyone know the date of the 2 stroke extravaganza in Southern California this year?
Thanks.
Todd
Does anyone know the date of the 2 stroke extravaganza in Southern California this year?
Thanks.
Todd
#6
General Chatter / Southern California mechanic
August 06, 2022, 04:44:52 PM
Hello,
Does anyone know of a good RD mechanic in Southern California?
I need to have my engine gone through and tuned.
Thanks.
Todd
Does anyone know of a good RD mechanic in Southern California?
I need to have my engine gone through and tuned.
Thanks.
Todd
#7
eBay/FB Marketplace/Craigslist watch / Re: 1979 Yamaha RD400F Daytona Special, $5,900 - CL - Artesia, CA
August 31, 2021, 11:16:40 PM
Will someone please buy this green monster! He has it on Offer up and I get updates on it every day!
It's driving me crazy!🤣
It's driving me crazy!🤣
#8
Turning Wrenches / 1976 Yamaha rd400 air filter
June 20, 2021, 12:42:38 PM
Hi guys.
I have an all stock 1976 RD400 and I am going to put a Y boot with a K&N filter on it.
What jetting changes do I need to make if any?
Thanks!
Todd
I have an all stock 1976 RD400 and I am going to put a Y boot with a K&N filter on it.
What jetting changes do I need to make if any?
Thanks!
Todd
#9
Events / Re: 2 STROKE EXTRAVAGANZA Weekend! October 9-10 2021
June 20, 2021, 12:06:32 PM
It's a great show! I'm glad it's back this year!🥳
#10
General Chatter / Re: T shirts WHO can make them?? I want one-2
May 21, 2021, 06:17:20 AM
I would like one too!
Thanks!
Thanks!
#11
Turning Wrenches / Re: 1976 rd400 wheel bearing spacer flange.
February 19, 2021, 10:34:22 PM
Thanks!
#12
Turning Wrenches / 1976 rd400 wheel bearing spacer flange.
February 17, 2021, 10:57:54 PM
Hello,
My wheel bearing spacer flange got bent when I was removing the wheel bearings.
Does anyone know where I can get a new one?
Thanks.
Todd
My wheel bearing spacer flange got bent when I was removing the wheel bearings.
Does anyone know where I can get a new one?
Thanks.
Todd
#13
Turning Wrenches / Re: Powdercoating rd400 wheels
January 03, 2020, 01:10:06 PM
I'm going to powdercoat my wheels too.
Do the crush drives get destroyed when they're pulled out? Do you have to buy new ones?
Thanks.
Todd
Do the crush drives get destroyed when they're pulled out? Do you have to buy new ones?
Thanks.
Todd
#15
Turning Wrenches / Rd 400 wheels
December 04, 2019, 03:04:18 PM
Hello,
Can someone tell me if the wheels from a 78 and 77 RD400 will fit on a 76 RD400?
Thanks.
Todd
Can someone tell me if the wheels from a 78 and 77 RD400 will fit on a 76 RD400?
Thanks.
Todd
Pages1