Messages

https://www.ebay.com/itm/162934665227?_trkparms=aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D20200818143132%26meid%3D99c14d10d17d4505a4f7ab6c87040f2a%26pid%3D101198%26rk%3D4%26rkt%3D12%26mehot%3Dpf%26sd%3D233989980919%26itm%3D162934665227%26pmt%3D1%26noa%3D0%26pg%3D2047675%26algv%3DSimplAMLCvipPairwiseWebWithBBEV2bDemotion%26brand%3DYamaha&_trksid=p2047675.c101198.m1985

https://www.ebay.com/itm/154002043203?_trkparms=aid%3D1110018%26algo%3DHOMESPLICE.COMPLISTINGS%26ao%3D1%26asc%3D20200818142838%26meid%3D01b1a0a27c26413e92da5e51612e307f%26pid%3D101197%26rk%3D2%26rkt%3D12%26mehot%3Dpf%26sd%3D233989980919%26itm%3D154002043203%26pmt%3D1%26noa%3D0%26pg%3D2047675%26algv%3DItemStripV101HighAdFee%26brand%3DYamaha&_trksid=p2047675.c101197.m1850

https://www.ebay.com/itm/154005647934?hash=item23db73b23e:g:kd0AAOSwi8FfC0kW

https://www.ebay.com/itm/154005656291?hash=item23db73d2e3:g:bkwAAOSwcINfC8HK

https://www.ebay.com/itm/154045368057?hash=item23ddd1c6f9:g:ZGsAAOSwI5tfBQqo

It was hard for me to find a not dented tank 10 years ago and if I needed it I would have bought it.

https://www.ebay.com/itm/133750927650?_trkparms=aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D232195%26meid%3D75f1abc0c0a74e90b3c595d2df91a6f6%26pid%3D101195%26rk%3D3%26rkt%3D12%26mehot%3Dpf%26sd%3D154317247538%26itm%3D133750927650%26pmt%3D1%26noa%3D0%26pg%3D2047675%26algv%3DSimplAMLv9PairwiseUnbiasedWebWithSearchFilterPromotion%26brand%3DYamaha&_trksid=p2047675.c101195.m1851

https://www.ebay.com/itm/362088353467?hash=item544e25cebb:g:zIYAAOSw6btZqNx6

https://www.ebay.com/itm/254960909303?hash=item3b5cdabbf7:g:KOMAAOSwnPtggdwz

https://www.ebay.com/itm/254959946466?hash=item3b5ccc0ae2:g:s1kAAOSwGSpgigZ2

https://www.ebay.com/itm/254952310196?hash=item3b5c5785b4:g:S6oAAOSw9mJggc8m

Received, thank you.

I have also not purchased chambers as of now and have come across these, anybody ever run them.
These in the photos are tight with retaining the stock foot pegs and looks like uncut center stand brackets on the frame.
K2 TEC
http://www.moto-works.jp/k2tec/rd400.html
Developed for street use.
Provides increased torque and throttle response at Mid RPM range.
Carburetor jetting is not needed for street use.
For use in racetrack, where prolonged high rev situation is necessary, increasing main jet setting is recommended.
Exhaust pipes are spring jointed to deal with vibration.
Chambers are build to order and lead time is about 4 weeks from the date of order to ready to ship.
NOTE:Chambers might slightly interefere with bike's frame caused by indivisual frame difference.

Chambers on above link will fit on your 1975 RD350B AC, but might require some modification.
2 into 1 system listed will not fit for sure.

Shipping fee is US$220 to USA.

Best Regards,
Rick
Moto-Works.jp

Location Japan

Very nice, I have not been to a 2 Stroke meet in quite some time.
Have a great time and be safe.

https://denver.craigslist.org/mcy/d/arvada-1972-suzuki-gt750/7309829267.html
First owner and all original