Messages

Resurrecting this thread. I have been getting a lot of messages from people.

I've added my designs to my thingiverse page, its all free. https://www.thingiverse.com/quocle603/designs

They are not 100% perfect, but could be use for some of you hobbyist.

i used 3/16" female blade connectors.

cut the stock eyelets off replace with them.

its literally the 1st thing i did on the ds7 last week.

I've designed a battery box for this with 2 spark plug and documentation/registration holder.

https://www.thingiverse.com/thing:4349995

Feel free to tip 

I'm currently working on one right now. What tank is that?

If it wasn't a pain to do, I would do this all the time for my bikes. I plan on doing this to winterize my bike with some stabilizer.

I had some issues with my PWK28, but I ultimately made my own custom cables with some solder and flux.

check out 2 stroke stuffing on youtube. he went crazy on his motorized bike build. he's currently onto bigger and better things now.

I've had my engine run backwards. It was pretty scary.

I saw one of these at a bike show earlier this year. What a cool looking bike, they are very far and in between.

I've always wanted to test ride one of those. Seen many of them on the road and have only heard good review on them.

I've used 2 stroke oil the past. I've been using the K&N rebuilt/recharge kit to clean and oil my filters now.

one of the few four strokes I would own.

Looking to change out my tires for my RD. Any suggestion on what brand/style I should run?

Sorry for the delay in response but I settled with Shinko: 712. I don't have a bunch of experience with a ton of tires but these were much better than whatever were on the bike when I got it.

Hope he's doing alright. He is chalk full of knowledge. :)

I've built my own vapor blaster and designed nozzles for the guns used. My top end looks great after doing a new rounds of blasting.

That would do it... your title made it seem like Uni filters are problematic.