R5 Gauges question

[soonerbillz]

I will need a set of gauges for my bike.. before I go and buy some I was wondering if the yds7/R5/RD share the same tachs and speedometer. or are they different?
Thanks

[m in sc]

ds7 and r5 are same.

rd 250/350/400 will function.  all ratios are the same across yamaha and kawasaki.

i actually have these on another bike and they are fantastic. 



on www.partsnmore.com the matching tach is: #03-0759

the speedo is here on partsnmore, cheaper too.

#03-0760

[AAAltered]

YDS7 and R5 are identical.  RD has different, angled input shafts.

[m in sc]

i dont have any close up pics but here they are on my t500. they are 99% the same size as an r5 gauge.

I painted the housings with wrinkle black.

[soonerbillz]

Thanks AAAltered. That is one of the questions I had.. Was not sure which I needed.

[soonerbillz]

ds7 and r5 are same.

rd 250/350/400 will function.  all ratios are the same across yamaha and kawasaki.

i actually have these on another bike and they are fantastic. 

the speedo is here on partsnmore, cheaper too.

on www.partsnmore.com the matching tach is: #03-0759



#03-0760

Wow they are cheap. And look good too.
How did you mount them?

[m in sc]

stock bracket just opened it up a bit. would work on r5 mount as well with a bit of finesse . oh side note.. those are spare R5 rubber rings around the edge of the gauge. ;)

[Organicjedi]

Now it can do 130, right? 

[m in sc]

105. the extra 25 is for downhills and drafting 

[Striker1423]

Mark, might those gauges fit the stock RD? That's tempting as hell.

[m in sc]

the cable input isnt angled but you can make anything work if you try hard enough.