News:

Mat Oxley 1986 IOM TT


click above to read more about Mat.

Main Menu

YSR50/80 Build

Started by Diablo007, March 06, 2021, 03:18:04 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

m in sc

every state in the usa has to legally honor every other states recognition of ownership. a dirt bike with a flagged vin for off road use only is a different story. apples and oranges. just saying.   :twocents:


Diablo007

Thread is going off topic.  I'll add what I know regarding titling problems in Hawaii to the Vermont title thread as it is more pertinent there.  I do appreciate the input.
2 stroke junkie:
Too many motorcycles to list.  The highlights:
1973 Yamaha RD350 Cafe Racer project; 1983 Suzuki RG250 YammaGamma project; 1988 Yamaha YSR50/80 project; 1984 Yamaha RZ350; 1984 Yamaha RZ500

Diablo007

Wanted to get the bodywork on today.  Lo and behold, all the grommets and spacers are missing.  Instead I tried to get the mounts and such straightened out.  It was crashed before I bought it in about 1996 or so.

So for today's update, pics of the almost stock one and the 80 build as of today.
2 stroke junkie:
Too many motorcycles to list.  The highlights:
1973 Yamaha RD350 Cafe Racer project; 1983 Suzuki RG250 YammaGamma project; 1988 Yamaha YSR50/80 project; 1984 Yamaha RZ350; 1984 Yamaha RZ500

m in sc


Diablo007

treatland.tv can bring in the DT100 ignition, $250 shipped to Hawaii.  May be cheaper to the States.  Once I have an idea of what's necessary and the costs to get it back on the street I'll decide if it's worth it or not.
2 stroke junkie:
Too many motorcycles to list.  The highlights:
1973 Yamaha RD350 Cafe Racer project; 1983 Suzuki RG250 YammaGamma project; 1988 Yamaha YSR50/80 project; 1984 Yamaha RZ350; 1984 Yamaha RZ500

Diablo007

So the parts order arrived today.  2 spacers necessary for the lower were missing, 2 extra for another part were included instead.  Emailed the vendor, hoping they'll send the correct parts with the parts that were still on backorder.  Hopefully I'll have time tomorrow to start installing the bodywork.  Still waiting for the intake spacer with oil injection nozzle.  Friend has a tough work schedule right now.  Not a lot of free time.
2 stroke junkie:
Too many motorcycles to list.  The highlights:
1973 Yamaha RD350 Cafe Racer project; 1983 Suzuki RG250 YammaGamma project; 1988 Yamaha YSR50/80 project; 1984 Yamaha RZ350; 1984 Yamaha RZ500

Diablo007

Test fit the bodywork this past weekend.  Seems while the upper fairing bracket looked straight it isn't.  I'll need to repair the front center bolt hold and then try to get everything lined up.  Seems the side mounts (where the blinkers mount) have been moved forward, and the whole thing was moved up a bit also as the upper doesn't line up with the lower.

The spacer with the oil injection nozzle was finished this weekend also.

Pics attached.
2 stroke junkie:
Too many motorcycles to list.  The highlights:
1973 Yamaha RD350 Cafe Racer project; 1983 Suzuki RG250 YammaGamma project; 1988 Yamaha YSR50/80 project; 1984 Yamaha RZ350; 1984 Yamaha RZ500