Who wants to do my cylinders and heads?

[RDDave]

I have original 64mm cylinders and stock heads from my RD350B. The Bassani chambers are the only mod, everything else is stock.

I can have a local shop open the cylinders up for the .50 pistons from Yambits or I am open to that being part of the rest of this job.

I would like the heads modded for angle and quinch/squish and the cylinders decked and modded for the 400 gaskets. This is a street bike. I am looking not looking for a race tune, just something that will enhance it without making it a pain to ride on the street.

Who here is interested in doing this for me? I have it all in hand and am ready to box it up and ship. You can post here or PM me if you prefer.

This site has been really important to my me and my RD. I am looking forward to this summer with a fresh engine.

Thank you! 

[RDDave]

Any recommendations.................

[2 Smoker]

Ed Toomey

https://www.facebook.com/EdToomeyDesigns/

ed@toomeydesigns.com

(864) 581-5981

[sav0r]

I sent you a PM earlier today, Dave.

[RDDave]

Thanks for the recommendations.

I'll get on it. It'll be warm weather before you know it.

[Twill864]

Scott Clough

[RDDave]

Contact info?

[irk_miller]

Ed Toomey

https://www.facebook.com/EdToomeyDesigns/

ed@toomeydesigns.com

(864) 581-5981

Ed's shop is just up the road from me.  He built my RD350 crank and he's done some triple cranks for me as well.  Not cheap, but the work is top notch.

[m in sc]

 Scott Clough Racing (SCR) 760-365–4505

[RDDave]