• Welcome to 2 STROKE WORLD .net.
 

A Quick Throttle and cables for a set of 34mm TM carbs

Started by rd400greenhorn, June 21, 2019, 04:53:58 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

rd400greenhorn

Any setup / recommandation on what works?
Preferrable the Throttle in Black

Chuck supertune, maybe you have a working set? :)

SUPERTUNE

RD machine work, boring, porting, cranks and engine building.


Chuck 'SUPERTUNE' Quenzler III
Team Scream Racing LLC
1920 Sherwood St. STE A
Clearwater, FL. 33765
cqsupertune@tampabay.rr.com

rd400greenhorn

Chuck
That looks very Nice, the magura is sweet.

Its premix :)
I would love a set for my build, then i know it works and looks just right  :patriot:

rd400greenhorn

Or either one actually
Any preference? :)

Just as clean and tight as Possible

quocle603

Do not underestimate the power of a two-stroke.

1975 Yamaha RD350 (modified), 1973 Yamaha RD350 (stock), 1971 Suzuki T500, 1981 Yamaha XS650 HS2, 1982 Honda MB5, 1980 Puch Maxi, 1979 Puch Magnum, 1993 Tomos Bullet, 2003 Malaguti Firefox F15 LC

SUPERTUNE

The dual pull Domino one is better!  Here's why... No splitter to deal with...
Also when wanting to rejet carbs, much easier to pull each carb out because of the 2 single cables give you more slack to pull out more to get to the top screws on TM flatslides and don't seem to be as fussy with re-synching the cables all the time.

A single pull Magura throttle has to use a splitter,  the splitter has to be very close to the stock location so limits how far you can pull out the carbs with the cables attached to the carbs and it you pull a little too much, you get the carbs cables out of sync again! :bang:
Plus I have to use a inline cable adjuster on the single side to control slack as no adjusters at the throttle cable hookup with the Magura.

Just some info for all of you!!
Chuck
RD machine work, boring, porting, cranks and engine building.


Chuck 'SUPERTUNE' Quenzler III
Team Scream Racing LLC
1920 Sherwood St. STE A
Clearwater, FL. 33765
cqsupertune@tampabay.rr.com

SUPERTUNE

RD machine work, boring, porting, cranks and engine building.


Chuck 'SUPERTUNE' Quenzler III
Team Scream Racing LLC
1920 Sherwood St. STE A
Clearwater, FL. 33765
cqsupertune@tampabay.rr.com

rd400greenhorn

Chuck,  would you send a message or mail, s domino Throttle with the cables, i would like to buy a set from you :)
Thanks again

m in sc

Chuck sold me one of the dual pulls for the LC hybrid. its great. totally worth it.  :toot:


rd400greenhorn

Thats awsome!.
I Will go for the same setup, Iam convinced 😁

Gill

Chuck, How much does it cost? Twin throttle cable setup!

SUPERTUNE

RD machine work, boring, porting, cranks and engine building.


Chuck 'SUPERTUNE' Quenzler III
Team Scream Racing LLC
1920 Sherwood St. STE A
Clearwater, FL. 33765
cqsupertune@tampabay.rr.com