Dyna S ignition question regarding cam bolt torque

[rdsarefun]

Just putting my ignition on this AM, taking a little longer as I fabricated a Y block connector for ignition power verses the scotch lock connector supplied with kit. my question is after installing and verifying "center" on the magnetic trigger that attaches to the rotor, what torque do you put on this?  Also, was thinking of putting on blue removeable loctite (small amount) on the bolt.  wanted to get opinions on this.  Thanks, Brian

[1976RD400C]

12-18 foot pounds torque and blue locktite is good. Then check the timing and adjust as needed.